|07-31-2007 07:49 PM|
|foxinthemudd||roger that, however its only a speed bump...good thing I can crawl over things bigger than that.|
|07-31-2007 07:46 PM|
|GrnTJ||Ah yes...school. That is my major cash hurdle. Otherwise the rig would be built to the hilt!|
|07-31-2007 01:43 PM|
|foxinthemudd||X2, join the club. I just bought a new warn 9k and I'm going to school as well|
|07-31-2007 12:43 PM|
True... I tend to live by the "if you're going to screw up, do it right" school of thought.
...and I'm broke most of the time because of it.
|07-31-2007 12:38 PM|
|foxinthemudd||but then again $$$$$$. ^^^|
|07-31-2007 10:23 AM|
The best rockers I've seen have been the Rockmen. They go wheelwell to wheelwell instead of fender to fender. Plus they come with reinforcement plates that go on the inside to make 'em a little tougher.
You can get them with or without the tube slider / step.
|07-31-2007 09:13 AM|
|foxinthemudd||I think alot of these rockers are 3/16 steel. I don't understand the obsession with the holes in the steel, wouldn't that just hang up on rocks and isn't that the point of the sliders to slide? those Nth degree sliders are pretty cool but I really like those BTF with the step rail on the side plus when I get them I can get rid of my black diamond plate and stupid nerf bars.|
|07-31-2007 08:16 AM|
ripbiker-Im building mine from 1/4" angle iron. A bit heavy but tough as nails. They're still probably lighter than most too. If I feel like I need it I can always weld some round stock off the side as a guard. Just drill some holes down it and you got yourself a rocker guard.
Scoob-Thanks. I will post pics. Not that its too complicated but I'll show everyone how easy it truly is if you want to save yourself some $$.
|07-30-2007 10:14 PM|
Good luck with that. Show us some pics of your finished product.
N'th dont work with a body lift so keep that in mind if your going that route.
|07-30-2007 09:39 PM|
|07-30-2007 09:30 PM|
|GrnTJ||Those Nth degree are pretty trick but its really just some plate steel bent and drilled. You could build those with some angle iron and a drill really.|
|07-30-2007 07:39 PM|
Black Daimond Plates for sale.
I have the black Diamond Plates on my 06 Rubicon right now. They are the steel ones that come standard on the rubicon TJs. No damage or scratches.. Will sell for 200 shipped. Let me know if your interested and i can post pics.
|07-30-2007 05:21 PM|
|foxinthemudd||go to www.bluetorchfab.com they have the rockers under the body armor link for like 219 + shipping.|
|07-30-2007 05:19 PM|
Ok these look awesome but are really expensive.
|07-30-2007 05:10 PM|
they look about like these. not the same ones but PSC, shrockworks and BTF have about the same design but BTF is a little cheaper.
|07-30-2007 03:53 PM|
|debruins||if mr c has them then they must be good!|
|07-30-2007 03:01 PM|
|AzTJ||Mr.Clifford has them on his uber jeep|
|07-30-2007 01:51 PM|
what do they look like? can you find any pics.. besides the "tiny-tiny-tiny" one on there site.. you can't see what they are... and don't see any pics with them installed on a rig...
|07-30-2007 01:44 PM|
gettin these when I have the cash hopefully in the next few months or so...
|07-30-2007 01:20 PM|
|debruins||looks like it bolts to the framed from the directions so i would say those are good!|
|07-30-2007 01:02 PM|
Anybody try these Flat Nerf Bars? I want a step for getting in once I have it lifted, but i also want good rocker protection.
|07-30-2007 12:57 PM|
|07-30-2007 11:41 AM|
|07-30-2007 11:29 AM|
Diamond plate on the Rubi
Is the diamond plate on the rockers plastic or metal? Im wanting to put these on my jeep but all i find is plastic molded. Do they bolt in or is there adhesive?