|07-31-2007 05:39 PM|
|07-31-2007 04:52 PM|
|foxinthemudd||no he just has the 01 SE, if I'm not mistaken I don't think that they came out with the rubi till '03|
|07-31-2007 04:41 PM|
so then rubis can run 5.13's right since they have the 44 up front
not sure if hes got a rubi, but he wont want 5.13's for 32's anyways
|07-31-2007 03:53 PM|
|kg4kpg||The 2000 4 cyl has 4.10's. 4.56's are plenty for 32's but 4.88's wont hurt you either.|
|07-31-2007 03:30 PM|
|07-31-2007 09:39 AM|
|07-31-2007 09:08 AM|
|foxinthemudd||thanks for your help guys. I really appreciate it, seeing how I know zero about gears . I will pass the information on to him.|
|07-31-2007 08:21 AM|
|GrnTJ||Becasue the ring gets too thin correct? It becomes too weak with the added teeth and less metal. Since its in a smaller axle there isnt enough room to make it strong enough. Thats what I understand. Is that correct?|
|07-31-2007 03:22 AM|
|1BLKJP||What he means is that the Dana 30 cannot run 5.13 R&P. D35's and D44's can, but not the 30.|
|07-30-2007 10:42 PM|
Am I all wet or is this correct?
I learn something new every day ya know!
|07-30-2007 10:14 PM|
|mrbigjeep||they won't fit the carrier|
|07-30-2007 10:14 PM|
5.13s won't fit or are they not available for a 30/35 combination?
|07-30-2007 10:09 PM|
5.13's wont fit
go with 4.88's
|07-30-2007 10:06 PM|
|07-30-2007 09:45 PM|
|RIPBiker13||What is better for the I-6 on 33's? 4.56 or 4.88?|
|07-30-2007 09:21 PM|
|GrnTJ||If you havent done them before than I wouldnt suggest trying to. Jus thave a shop do it, you'll be much happeir. Also, if he ever goes to 33's than 4.88's should be alright. I have 33's and 4.88's with the I6 and its perfect so he may be a little under powered but not bad at all.|
|07-30-2007 06:49 PM|
Give Joe a call at Absolute about getting your gears. www.absoluteoffroadphx.com. He's a board sponsor.
|07-30-2007 06:41 PM|
4x4groupbuy.com has a pretty good package for both front and rears for $460 (IMO)
|07-30-2007 06:40 PM|
|mrbigjeep||takes some special tools, patience, and definitely some experience. i would not attempt this alone unless he has experience with it.|
|07-30-2007 06:39 PM|
|foxinthemudd||where is a good place to get gears that low and what kinda pricing is he looking at? how hard is it to do yourself? if he decided to go with 33's would 4.88's work as well?|
|07-30-2007 06:24 PM|
4.88 would prolly be the best bet unless he can live with it for a while as he'll more than likely upgrade tire size later on and have to regear again.
|07-30-2007 06:01 PM|
|foxinthemudd||I don't know what he has, is there a way to tell?|
|07-30-2007 05:54 PM|
do you know what he has now, if he has 3.07's he will probably want to, but nothing is really necesary, really it just to make it easier drving not shifting and get more top speed
if he has 3.73's he'll be fine though
|07-30-2007 05:33 PM|
regear for 32's??
so I have a friend who just bought a 2001 tj, he got the 4cyl with the 5speed. he's putting a 2" spacer lift and a 1" body on it and wants to get 32" tires for it. do you guys think that he'll have to regear?? If so to what and where is the best place to get gears?