|03-25-2011 06:06 PM|
|03-25-2011 01:42 PM|
|03-24-2011 08:11 PM|
|herbie||i suggested this type of setup on another thread and was told by someone with air locker experience that they run under 5 psi hence my post hum!|
|03-24-2011 07:57 PM|
|TheTJRod||I have a compressor and want to keep my a/c|
|03-24-2011 07:40 PM|
Stock AC to OBA conversion
complete a/c to oba write up.... tons of *PICS* - JeepForum.com
|03-24-2011 07:25 PM|
Ford Explorer Ranger Enthusiasts "Serious Explorations"® - View Single Post - What PSI does the ARB locker need to engage?
muddyoval.com - View topic - ARB locker-lowest/safest operational air psi
And here is the ringer
ARB Air Locker O-ring Installation
I trust Stu.
|03-24-2011 07:20 PM|
Where have you found that 90psi is to high? I have seen 85-105psi for them.
Shrubeck - Good point I don't want the regulator to fail on me and not know. Could blow the seals in the lockers and cause all sorts of problems. About having the quick connect at full psi, I want the option of running air tools.
|03-24-2011 06:55 PM|
|shrubeck||x3, but you don't need two regulators. Just move that one and have full pressure at the quick connects. I'd also put a gauge after the regulator plumbed into the cab with some small air line.|
|03-24-2011 06:48 PM|
|03-24-2011 06:35 PM|
|herbie||90 lbs may be too high to lockers i have gleaned from other threads|
|03-24-2011 05:04 PM|
Air system setup
Alright, building an onboard air system getting ready for my ARB's. How does this diagram look. Everything where it should be?