|04-01-2011 12:52 PM|
Check out this video (1 of 3).. Shows how easy it really is, having the right tools before you start is the key. He doesn't show the whole process, but the video is a great place to start, the rest is just nuts and bolts anyhow.
|04-01-2011 05:57 AM|
Tie rod/drag link = piece of cake. Took like 20 minutes tops. Just took measurements from original and made the new ones match. No uneven tire wear either.
Ball joints, little more difficult. Never did it before I did mine, took couple of hours, a breaker bar, and a 5' pipe on the bar.
I've heard there is a BJ kit specifically for jeeps (can't remember exactly) - something about the angle of the BJ in the axle, but I just used this from Harbor Freight with no probs.
Four Wheel Drive Ball Joint Service Kit
|04-01-2011 05:24 AM|
Ball Joints/ Tie Rod Replacement
Never done this on a jeep before... Any insight?