|04-08-2011 12:27 AM|
|Ratdaddy||Nice! Thank for all the feed back' I just bought the spider trax 1.25. Now by reading your comments I feel a lot more comfortable putting them on. Thank guys|
|04-07-2011 06:55 PM|
i run the spider trax 1.25 spacers and they work fine. be sure and follow instructions. i didnt think i needed lock tight and had one come off. i was lucky and barely moving at the time. my son also runs the spacers and has about 40k mi. with them on with no problems.
|04-05-2011 07:58 PM|
|doclouie||Yes some shops call adapters spacers and spacers adapters. They are not using proper operational definitions. In Utah spacers are illegal and adapters are legal, but most places group them in the same category and will not touch them. Go to a real shop that has real mechanics and you will not have a problem. I put on spacers because I love the look of my Canyon rims.|
|04-05-2011 05:18 PM|
i ran a cheap set on my s10 for a few years with no problems and i ran her pretty hard they made the truck look 100X better, best thing i bought for it except new tires
|04-05-2011 05:05 PM|
But new wheels are DEFINITELY a great way to go if 1) you hate your current wheels or 2) need to replace them due to a build or 3) don't want to deal with double the lugnuts.
|04-05-2011 02:58 PM|
|Jerry Bransford||For the cost of spacers, I'd go with new aftermarket wheels with less backspacing instead. Even some aluminum wheels are not much more costly to buy than what some spacers sell for.|
|04-05-2011 02:20 PM|
|Standard||I use the 1.25 Spidertrax, I like the new stance of my TJ! Like mentioned above, you have twice as many lugnuts, just make sure you follow the instructions and use the Red loctite that comes with the kit and recheck torque after the first 50 miles.|
|04-05-2011 02:11 PM|
|04-05-2011 01:50 PM|
|04-05-2011 01:28 PM|
|04-05-2011 08:42 AM|
What they said. If you get them, be sure to remove any of the little star washers holding your rotors/drums on. They can be hard to see! But if you don't remove them, the spacers will NOT sit flat against the rotor or drum.
I've had mine since 2006 and no problems.
Things to consider though:
1. Many tire places will not TOUCH the tires/wheels while they are on your Jeep if you have spacers. Found this out the hard way. I have to take tires/wheels in in my Avalanche to have them balanced or changed. OR I have to take off the wheel myself in the parking lot and wheel it in there.
2. You WILL have twice as many lugs to worry about when doing brake jobs.
3. If you are not absolutely in love with your current wheels, new wheels MAY be a cheaper solution for you. Just get them with a lower backspacing number (pushed further out).
|04-05-2011 01:14 AM|
|doclouie||Have Spidertrax and I love them. Just torque them right and you will never have a problem. Stay away from the cheap ones as they can cause wobbling of your tires, whiich can be hard and expensive to fix.|
|04-05-2011 12:44 AM|
|Xjman1||SpiderTrax 1.25" and no issues. Like the fact they are hub and lug centric. Even most wheels are not hub centric. Do have more nuts to monitor but no biggie IMHO.|
|04-05-2011 12:19 AM|
Wheel Spacers, anyone run them?
I'm thinking of putting on some 1.5 wheel spacers, anyone run them? If so any ups or down I need to know? Thx.....