|04-07-2011 03:16 PM|
|JEEP8686||Thanks for the info,I do have 2-2.5in bump stop and nothing is hitting Diff!|
|04-06-2011 01:14 PM|
tested at full bump.
needs 1-3/8" bumpstop extension to clear the tie-rod, and required hacking half the face off the "SOLI" diff cover.
and here's the old JKS #126 hitting a Riddler diff cover, requiring about ~3-3.5" of bumpstop extension, yea thats right...~1" less uptravel than stock.
|04-06-2011 12:26 PM|
Front 1.0 - 3.5" Lift 2.5" Johnny Joint OE Rubber Bushing JKSOGS126 - Vehicles with Dana 44 front axle (or Dana 30 with aftermarket differential cover) and less than 3" of lift may require bump stop adjustment to prevent interference with differential cover.
PM me if you are interested in this one.
|04-06-2011 12:12 PM|
read this thread:
tj front adjustable track bars for 0-3.5", does yours hit or fit? - JeepForum.com
what brand do you have? there are only a few that use 22mm tie-rod ends you could get from MOOG...and they all are too weak to be used on track bars. They'll all fatigue and break over time due to hitting the diff cover.
My suggestion is go back to the stock track bar.
|04-06-2011 11:33 AM|
|JEEP8686||I should have added that it is a aftermarket track bar for a 2 1/2in lift and yes it is the track bar|
|04-05-2011 10:06 PM|
no such track bar product exists from MOOG. no stock type track bar is adjustable.
are you sure you're asking about a track bar? or tie-rod? or drag-link?
|04-05-2011 09:37 PM|
Track bar help
Hey can anyone help me find a part# for a MOOG track bar that has the adjustable end that threads into the track bar,I need the part# for the adjustable end?