|10-30-2012 11:58 PM|
|10-30-2012 11:21 PM|
|mike481||You've got a jeep, just grab a shovel and take the body out in the woods.|
|10-30-2012 09:56 PM|
|Black Magic Brakes||
It's also a lot easier to disco the engine harness and what not when you have much better access. You have brake lines, steering, battery and several other things that need disconnecting to remove the body and it's just easier with the front clip out of the way.
For the hood, pull the cowl and remove the bolts out of the hinges at that spot rather than damage the paint on the ones on the hood.
|10-30-2012 09:55 PM|
But I think that would make it a lot harder for any water that gets in or soaks into the foam to dry out. I could be wrong and usually am.
|10-30-2012 09:06 PM|
What do you serious wheelers think of that?
|01-08-2012 06:57 PM|
[QUOTE=shrubeck;1172130]The biggest issue is disconnecting everything the goes between the body and drivetrain. There aren't a whole lot of connections between the body and frame. Don't forget the fuel filler.[/QUOTE
you wouldn't happen to have a write up to refernece would you? I need to do the exact same thing and I want to know exactly what all I'm going to need to remove. I hate road salt.
|12-31-2011 02:03 AM|
|Rootj||I gotta do that.|
|10-02-2011 04:24 PM|
|MickeTJ||After every wheeling I do, I stick the gardenhose in the frame and let it flush out. Good to do once every winter aswell, due to roadsalt. Just a tip.|
|10-02-2011 03:39 PM|
It took about about 2 ten hour days with 2 guys and a couple more popping in and out to help. Put new brake and fuel lines, shocks and fuel tank straps Also had to weld/repair 2 body mounts
The frame rusted all along the drivers side. Was filled with sand and rotted from the inside out. I recommend EVERYONE check the frame for dirt or mud inside it
|10-02-2011 01:10 AM|
|solman||Good job! got any more pics?|
|10-02-2011 01:06 AM|
That looks fun, good job.
How long did it take from start to finish?
What was wrong with your frame?
|10-01-2011 09:10 PM|
|VETTE68327||Thanks for all the insight. Black Betty got her new frame last week. Job went surprisingly well and straight forward.|
|04-11-2011 05:21 PM|
|shrubeck||The biggest issue is disconnecting everything the goes between the body and drivetrain. There aren't a whole lot of connections between the body and frame. Don't forget the fuel filler.|
|04-11-2011 05:13 PM|
|Ibuildembig||They are essentially the same as a YJ and CJ, I sometimes pull um off whole like you want to. You just have to check and triple check everything before, during, and after to make sure you dont yank something out that cant be put back.|
|04-11-2011 05:07 PM|
Anyone got some step by step instuctions. Maybe a few words of wisdom?
|04-10-2011 10:40 AM|
|vekrause||I'm sure others have better insight, but I would also think certain lines/components tie the frame/motor/tub together. Steering, a/c, exhaust come to mind. To the brake or fuel lines attach to the body or frame?|
|04-10-2011 10:11 AM|
|VETTE68327||I was afraid you'd say that. Kinda hoping it would lift off in one assembly, easy off, easy on? LOL Doesn't look that way. Best to take the nose off completely first?|
|04-10-2011 08:46 AM|
yes the "tub" bolts to the "frame" with 11 bolts
one of which is under the radiator support.
it is much easier to remove the rad support/fenders first.. it makes it a heck of alot easier to unhook everything in the engine compartment.
|04-10-2011 08:28 AM|
OK Ladies and Gentlemen, can the TJ body come off the frame in one unit? Betty needs a new backbone and I wanna get her back on the road. Any help or advise will be appreciated! KEEP THOSE JEEPS ROLLING!