|05-11-2006 12:33 AM|
As much as I shouldn't tell you this, Yes, you can. You will need to get the correct weld in bung from either an exhaust shop, or what I use is what is called a "spark plug Non-fouler" when I have to place an sensor in stream. A regular "nut " will not work. I think you will notice a rather large decrease in low end power with the cat gone. Just remember, every parameter of the engine operating system is designed for that cat to be there. Good luck, and I waish you would change your mind.......But thats why we live in USA!!!!
|05-10-2006 12:08 AM|
|whitebuffalo||i dont think a nut will work becasue the o2 sensor has npt threads....|
|05-09-2006 10:51 PM|
|newjeeper||does anybody know if I can just weld a nut on the straight pipe and install the original sensor?|
|05-08-2006 11:51 PM|
Put it back in there. There WILL be problems. The O2 Sensor is used by the computer to constantly monitor the mixture to produce a "stoich" (14.7) Mixture of fuel and air. By removing/disabling the sensor it will make the computer think it's running LEAN and lengthen the pulsewith AND turndown time on the injector (Amount in Miliseconds that the injector is open) to try and richen the mixture. Also remember when the MIL light is on, the engine is in a different operating parameter. Sure an eliminator will "fool" the computer and MAY turn off the light, But it still will not be able to "monitor" and adjust the air/fuel mixture correctly for altitude/temp/load changes.(remember carbs??) It will always be full rich...and remember....gas isnt getting any cheaper these days!!!!!!
|05-08-2006 01:45 PM|
no ce light on mine
emissions laws are a scam. construction equipment (which is smog exempt) pollutes MUCH more than my 4 banger yj, but lobbyists line politiicans pockets so they dont have to worry about it. im not losing any sleep over it. im no enviromental rapist or greenie but damn, theres bigger fish to fry than a few cats going missing......
|05-07-2006 01:03 PM|
I've noticed no difference in power or m.p.g. but i DONT like the ce light being on. When I have it apart to install my lift I'll do a high flow cat, but Ive got to let a little time go by so i dont feel like Im redoin something I never should have done to begin with.
As far as sellin it NO WAY JOSE I AM HOOKED JEEPS KICK BUTT (i do realize if I do sell it Ill have to fix it or risk being thrown into federal prison for life for violating federal emmissions laws)
|04-28-2006 10:00 AM|
I am definately not a greenie tree hugger. If I were I wouldn't be driving a 14mpg Jeep. I'd have some hybrid econo box POS. Hell, my last vehicle was a 2004 F250 4x4 crew cab with the V-10. I got about 7mpg with that one.
However, I am of the opinion that the pollution control devices installed by the mfg and required by the feds should be in good working order. End of arguement.
I don't care what he does or doesn't do and as long as he doesn't have to get tested or sell it to someone that does no one will ever be the wiser.
|04-27-2006 06:03 PM|
I don't believe that he was being serious. lighten up.
|04-27-2006 11:02 AM|
|amerijeep||I think he is only joking. Don't get mad...|
|04-27-2006 10:10 AM|
|04-26-2006 06:28 PM|
|97TjZack||I've been in this arguement so many times...haha. I dont have to be tested at all were I live. And as for the air, I wish I could afford a new cat. But I have axles to put in!!! If you want to buy me a cat, I'll PM you my address!!|
|04-26-2006 04:37 PM|
|04-26-2006 02:07 PM|
|whitebuffalo||no smog test where im at|
|04-26-2006 10:00 AM|
|paracutin||I hope you guys never have to be smog tested.|
|04-25-2006 10:38 PM|
|97TjZack||I noticed no power difference at all when I took mine out...hopefully the same happens to you...|
|04-25-2006 06:24 PM|
|BeerMonkeY||i heard that on older tj's the rear sensor only monitors a/f but wont actually change anything just make the ce light come on|
|04-24-2006 08:47 PM|
I removed it cause it was broken inside and did not want to go get one as I am cheap and lazy and I think I'm smarter than I really am LOL.Thanks for the link I will buy one of those before I spend $ on a new cat.
|04-05-2006 10:01 AM|
|whitebuffalo||check here http://www.o2sim.com/|
|04-04-2006 10:51 PM|
|4Jeepn||Why on earth did you take the cat out?|
|03-29-2006 09:22 AM|
I have installed flowmasters on several vehicles, but always left the catholic converter alone. Sorry I can't help you with that one.
My momma always told me to leave dem catholics alone........lol
|03-28-2006 10:57 PM|
Please help me be right
I cut out the cat on my 1997 TJ 4.0 and now i need to figure out how to jumper the 4 wire sho2 sensor (rear) to eliminate the check engine light and assure there will be no power,fuel/air ratio problems. the "right "part is i told my better half NO PROBLEM. Well, i have yet to find the correct solution to allow me to be right. Thanks in advance.