|04-26-2011 04:34 PM|
|Buddha||I've read several posts related to this type of thing and usually the first suggestion is to clean the contacts on the gauge itself.|
|04-25-2011 09:33 PM|
|JamesHolmes||You could cut thru your tub. Dropping the tank would be easier.|
|04-25-2011 09:04 PM|
It was working fine and accurate. Now it stays on 1/2 tank even when filled to the rim.
Not sure if it will read lower than that cause I havent burned it down that low yet (lately). I dont drive it much so it will be awhile before I can tell. Fuel pump works fine no issues doesn't sing or anything. Is this a harbinger of things to come?
Any tricks to check that sending unit without dropping the tank?