|04-30-2011 05:52 PM|
Most instructions advise loosening the transmission mount screws before doing the MML and they will find the right spot.
Just got to remember to tighten them when you're done.
Don't know if 'slightly angled location' sounds right though.
|04-29-2011 05:07 PM|
|man44a||They are moved to the front of the mounting holes.|
|04-29-2011 01:23 PM|
Transmission Mount under Skid question
I was wondering if it's normal for the transmission mount screws to be in a different, slightly angled location now after doing a 1" MM lift. I'm thinking it's probably normal as the entire angle is changed, but I can't find any reference to it in the install tutorials.