|05-03-2011 12:34 AM|
So, removing that plate reveiled an even larger space. The frame apparently makes its own pocket for my compressor and a few other items. I think with a tool roll bag, everything but my jumper cables should fit there nicely.
Provided that there isn't any real reason NOT to use that space, a velcro strap or 2 will help tie down my torque wrench nicely to keep it from rattling, and a few eye bolts to replace the bolts that held the plate down will allow me to secure things nicely I think
Will be posting pics when this project is ready.
|05-02-2011 11:57 PM|
|Coronatj||That's where my on board compressor sits.|
|05-02-2011 11:46 PM|
In the newer wranglers it was moved to behind the passenger tail light, to free up space for the abs system
|05-02-2011 11:46 PM|
|05-02-2011 11:36 PM|
|Mr_RPM||what does it do? some type of filter for something?|
|05-02-2011 09:19 PM|
It is for emissions. Remove it and you will see the check engine light all the time, and have problems all the time.
|05-02-2011 08:15 PM|
It looks nice, but a bit pricey.
|05-02-2011 07:47 PM|
|05-02-2011 07:06 PM|
|05-02-2011 06:53 PM|
|Mr_RPM||to bad i cant get her up to 88. lmao hahahaha|
|05-02-2011 06:44 PM|
|05-02-2011 06:42 PM|
|Mr_RPM||what is a charcoal canister? tried looking it up real fast and seems like many remove them, maybe the OPs jeep had it removed at one time.|
|05-02-2011 06:29 PM|
Your round thing is for cruise control. Your square box is the charcoal canister, same thing as mine that is round. I have no cruise. The OP must have the charcoal canister in another spot.
|05-02-2011 06:15 PM|
if you look at the OPs pictures the same little round thing exsists, just in a different spot, like closer to the front of the jeep.
the big black box in my pictures where the round thing connects is there instead, why do i have this box and the OP does not.
|05-02-2011 06:12 PM|
|97wrangler-242||See if there's a wire coming out of your front wheel bearings. No wire, no abs|
|05-02-2011 06:02 PM|
so what do I have here?
no ABS, i think my build sheet didn't even have ABS.
i do know that if i do have ABS that they dont work.
whats going on?
|05-02-2011 05:32 PM|
I'm debating removing that plate and moutning something longer/deeper in it's place. There seems to be a lot of space below it, should be put to good use
|05-02-2011 05:22 PM|
|05-02-2011 05:00 PM|
Popular for mail delivery vehicles or if you're an Aussie or Brit.
|05-02-2011 04:49 PM|
|97wrangler-242||What's a rhd? Sorry|
|05-02-2011 04:26 PM|
|05-02-2011 09:53 AM|
|05-02-2011 05:30 AM|
|05-02-2011 01:01 AM|
|05-01-2011 11:01 PM|
|05-01-2011 10:39 PM|
On mine thats where I'm gonna build the "under the hood tool box" Luckily enough God blessed me with NON abs brakes
|05-01-2011 09:16 PM|
|jeeperharmon||I put a small battery there for a back up/ audio / aux lights|
|05-01-2011 07:23 PM|
[QUOTE=UnlimitedLJ04;1213311]it was for the optional flux capacitor.
just found my next bolt on
|05-01-2011 06:22 PM|
|Plowboy1970||Yep, for the ABS stuff.|
|05-01-2011 06:04 PM|
it was for the optional flux capacitor.
but seriously, it was the ABS module on LHD models and the battery tray for RHD models.
|This thread has more than 30 replies. Click here to review the whole thread.|