|03-23-2013 10:37 PM|
|03-23-2013 02:56 AM|
someone just posted this one the other day, seems similar to what you want to do.
Cool Tech LLC. JK VersaMount 2
|03-23-2013 12:58 AM|
Panavise Install 2013 Wrangler
I just installed mine... you need to put the bolt side in-behind the radio holes. Otherwise the dash doesn't connect properly. I made that mistake first and I think I busted the clip on the bottom right side of the panel.
My intent is to use a ram mount and setup my Nexus 7 tablet... although the Panavise mount is way too flimsy. My 3 yr old could bend it. With just the ram mount it jiggles more than jello. I'm going to see if I can rig a piece of metal from the dash handle. That should sturdy things up?
If I was to do it again... I would have went with a custom mount from a local shop.
|04-10-2012 05:38 PM|
|cheap4tw||Ok well in a bit of frustration I've declared this current mount scrap and am re-ordering. Hopefully the 2nd times the charm.|
|04-10-2012 04:35 PM|
|Sparkplugg||I did the same with no problem.|
|04-10-2012 04:21 PM|
|cheap4tw||Did you have any trouble with the trim on the right side of the radio? I couldn't get the clip to go in with the mount in place|
|05-06-2011 01:53 PM|
|05-06-2011 01:06 PM|
|CRNA||Where did you get that? I tried to install one from an older model and it wouldn't work on the '11. I haven't been able to find anything for the '11, and what you have is just what I need.|
|05-06-2011 12:39 PM|
Installed the Panavise mount
Just got finished installing a Panavise mount for CB and GPS on the 2011 JKU