|11-21-2011 10:03 PM|
|11-21-2011 12:41 PM|
Wayne, would you ever consider including a welded-on fairlead mount with this bumper? The design is exactly what I'm looking for, but I would want a welded fairlead mount.
I have installed your products before and know completely the quality at hand. Besides this bumper, I am highly interested in your boatsides.
|11-20-2011 11:37 PM|
Until then here's some pictures
|11-11-2011 12:12 PM|
|11-10-2011 11:43 PM|
|clarkkent||Just ordered mine! Can't wait to get it|
|11-10-2011 07:39 PM|
Went through some pricing and I feel comfortable offering this at $248.96 retail. Will include our typical BK05, semi gloss black.
I've already updated our website to reflect the change in cost.
|11-08-2011 08:26 PM|
All of the items on the website are curent items being produced
|11-08-2011 08:17 PM|
I've looked over the site. Didn't know if those were the ones you were making now that you're back in business. The link posted above says bumper with hitch receiver, thats where that came from. The one I liked didn't have a hitch on it. Thought I'd ask.
|11-08-2011 08:16 PM|
|11-08-2011 08:05 PM|
The light hoop does not come with it.
All of our bumpers look the same as they have over the last 10? years
The picture below is the Super Stubby bumper and FHT light hoop. The other is of only the Super Stubby.
I think you would be best served if you browsed the website www.jeeperman.com rather than me trying to post a bunch of pictures in this thread that don't really pertain to the Super Stubby bumper.
|11-08-2011 07:45 PM|
|HarryJeepGuy||Hmmm, pic didn't work there either. I'll try again.|
|11-08-2011 07:44 PM|
|11-08-2011 12:33 PM|
Currently MSRP is $319.96
Jeeperman: 46 inch wide CJ/YJ/TJ Front Bumper with Hitch Receiver
(online picture/URL description is wrong as I'm still working on the website for this item)
I believe that is the same price it was selling for in 10/07 when Jeeperman folded, as is all of our other prices. But I still need to audit the cost on building these and think I can get it down lower as well offer powder coating as a ~$50 option. Bare will ship unboxed, powdered will ship in either box or most likely wooden crate, like our other heavier items.
$319.96 would be semi-gloss black powdered and crated/boxed. Minus ~$50 or so for bare.
|11-08-2011 05:55 AM|
|Skyhawk32||Man I wish I could have one of those. I hate new jersey state bumper laws. Think I'll move|
|11-08-2011 12:32 AM|
|HarryJeepGuy||I'm interested. Looks good. Pm me or post details. Thanks. I have a 01 TJ.|
|11-08-2011 12:16 AM|
|trukdryverchuck||How much? I've got an 06 LJ. Pm me|
|11-07-2011 11:16 PM|
Digging this old thread back up to say I'm going to re-release this bumper soon. I have 4 (one wasn't bent right) sitting in the shop, ready to weld up.
As well currently it's setup for just about any winch on the market with a 10x4.5" bolt pattern. What do you all think about changing it to accept the 9.0 RC and put a hole in the middle so you can run the winch down to your axle? Since it's really not a fairlead friendly bumper anyway....
..And here's a few pictures of it... The first is with the FHT hoop - same main hoop as FHP, but no sides. The other is an old picture of only it so you can see the way it mounts and etc.
|08-26-2007 08:04 PM|
|NalinMFG||i remarked awhile back about the chicago cubbies, and how im a cardinals fan|
|08-26-2007 06:20 PM|
|AzTJ||What the hell are you talking about?|
|08-26-2007 06:06 PM|
|Triple88a||i bet i'll get flamed for it but honestly i dont watch BB. I get bored while i wait for each player to dig a foot hole for his feet and get ready to play for 15 - 20 seconds and then wait for them to dig again.|
|08-26-2007 05:58 PM|
Here another stubby bumper from TnT.
|08-24-2007 11:25 PM|
|NalinMFG||i havent bought a whole lot off the internet, but he has been one of the best ive communicated with. It's close between him & Dirk @ DPG, but like you said he's on top of things + like everyhting has free shipping on top of the low prices!|
|08-24-2007 11:15 PM|
|Scout||Jason @ ReRock 4x4 is one of my favorite vendors. I've spent a lot of money with him in the past. He's always WAY on top of things.|
|08-24-2007 11:12 PM|
|08-23-2007 12:59 PM|
Another place to check is Tomken.com, that's where I got mine, and they have a nice variety, with or without hoops, rec., clevis, etc., and they all come powder coated! I have one, it mounted up nice and clean, they also carry all kinds of brackets, adapters, etc for fog lights, front plate, but you might have to call and ask for small stuff, it might not show up on the site!
|08-22-2007 09:48 AM|
|NalinMFG||well its not on all the way; that may be why, but at the end of this month I will be giving 4x4rockshop $200|
|08-22-2007 09:45 AM|
|mrbigjeep||i agree...just needs some cover up behind that bumper...|
|08-22-2007 09:41 AM|
|Scout||That looks good!|
|08-22-2007 09:40 AM|
i just talked to a guy on jeepforum that orded one and just got it. pics -->
here's the conversation so i dont leave any info out
"It's already here, just haven't painted it. Here are some of it "in place" on the Jeep. I didn't install it all the way because it will take a sledge to get it on there. It is a great looking bumper. Remember, it isn't on all the way so that is why it looks a little funny. I need to paint it and order the stinger and radiator guard that I'm going to weld on. I can't wait to get it on there!"
|08-20-2007 09:37 PM|
|NalinMFG||I'm if fan of the big STL cards, you ever heard of them Triple88a?|
|This thread has more than 30 replies. Click here to review the whole thread.|