|05-13-2011 07:17 AM|
Well.... its not 'tomorrow'... but I got it done. Took me all of 30 minutes to swap it all out.... Got my frame under the newer soft top.... DONE!!!!
Thanks for all the help guys!!!!!
|05-08-2011 10:20 PM|
|TnDz TJ||AWESOME!!! Thanks for the explanation and the video. I get on that tomorrow....|
|05-08-2011 08:20 PM|
You can look up our directions for a Replace-A-Top. That's our replacement fabric for a factory frame, so it's the same as what you're doing. Go to bestop.com, find the R-a-T for your Jeep, and you'll see install guides.
YouTube - Bestop Replace-A-Top Part 1
|05-08-2011 08:17 PM|
|robbiecc||^^^ that sounds familiar also. went to look, thought i still had the directions but if i do, who knows where they are|
|05-08-2011 08:09 PM|
|Jerry Bransford||Unwrap the top from around the header to expose the 8-10 self-tapping screws that hold the fabric to the header.|
|05-08-2011 08:07 PM|
as i recall, my bar is screwed together. i had to sandwich the material between the 2 peices, tighten the screws, then fold/fit it over the front and over the top to conform to the shape of the bar.
hopefully this makes scense
|05-08-2011 06:22 PM|
Removing soft top from frame
I have two soft tops... one is jacked with an AWESOME frame... the other is and AWESOME top with a jacke up frame.
I need to swap the good frame to the good soft top.. the question is... how to I remove the top from the windshield header?
To I just remove the rivets from the frame bars on both side and use the one on the good top?
Seems like there are rivets or some sort of connection under the sewn fold of the top to the the windshield channel of the frame.
What is the correct way to accomplish my goal?