|05-17-2011 11:02 PM|
hmm, that wasn't hard....granted some of those I wouldn't think of using...
|05-17-2011 09:05 PM|
|05-17-2011 08:55 PM|
For anything they Make.
I'm sure it's well worth it though. Just ALOT more than I'm willing to Spend.
|05-17-2011 08:50 PM|
|05-17-2011 07:43 PM|
|Duramaxxed||I can't Find a 3" Rear Spring. Most, if not all, are 2.5" for the Rear. 3" for the Front are Easy to Find.|
|05-17-2011 07:38 PM|
|UnlimitedLJ04||ditch the BB and get 2.5-3" springs....|
|05-17-2011 07:30 PM|
|dan188||cool, sounds like your good to go|
|05-17-2011 07:21 PM|
I already got the 2" BB On the Jeep and got a good Deal on New H&R's.
I already got a 3/4" Skid Drop.
|05-17-2011 07:20 PM|
|dan188||I don't want to ask a stupid question, but why not just use 3" springs and no BB?... you are probably gonna need some spacers to lower the t-case. I think 3" is usually when the vibes start to happen. good luck and post some pics once its all done!|
|05-17-2011 05:27 PM|
~Now Going To Do A 3" Lift~
Of the Parts Listed that I already have in the First Post, what else do I need?
I'll be Keeping the 2"BB On the Jeep and Adding the 1" H&R Springs.
Should I get a Front JKS Track Bar now?
|04-19-2011 08:07 PM|
|Duramaxxed||The Shocks won't get Over Extended, or an Extra .5" won't even matter?|
|04-19-2011 07:57 PM|
|rda616||You should be all set!|
|04-19-2011 05:59 PM|
Going From 2" BB To 2.5" Spring Lift
Will I need any New Parts that I don't have already Installed if I go from a 2" BB to a 2.5" Spring Lift?
I already have JKS Adjustable Rear Track-Bar, Bump Stop Extensions, Shocks (came with the 2" BB).
Will I need to Add anything else to "do it Right"?