|05-22-2011 01:21 PM|
|WensToy||while bummer, we had jeep in reverse, running cold and scott tried different wires and nothing happening but when jeep warmed up it started stuttering sound like it was going to stall and he wasnt messing with any wires!! so not sure. messed with more wires but with it stuttering with not messing hard to tell with wires. this sucks|
|05-21-2011 10:33 PM|
|WensToy||thanks, my husband said he will try that out tomorrow! thanks, i hope this fixes the problem!!!|
|05-21-2011 04:51 PM|
Try this, hot jeep, jack it up so the wheels are off the ground.
Start it up and put it in reverse.DO NOT APPLY THE BRAKES! See if it stalls.
If it doesn't,Now try it with the brakes ON, and see if it stalls then when put into reverse.
If it does, I'd say most likely you have a harness that's rubbing on something and shorting out.
With the wheels off the ground, the torque on the mounts and such is less, as all they have to do is spin the wheels.
On the ground or with the brakes on , every thing now has to torque hard over to get the jeep moving.
You could have a harness that once it gets hot it droops a tiny bit, and then when the drive train torques in one direction it touches a rubbed through wire and grounds it out.
I had an S-10 do exactly this. Ran perfect cold, soon as it got warmed up put it into reverse and it would die. Found a power wire to the smog pump ran right above the exhaust manifold, soon as it got hot the wire would droop down, and when put into reverse it would touch the manifold. That wire was on the same circuit as the ECM.
Ground out and would shut down the ECM.
|05-21-2011 04:00 PM|
When jeep has ran awhile reverse wants of stall or it does stall- help please!!!!
what we noticed is when the jeep is first started up(cold) you can go in reverse with no problems and go back and forth and back in reverse and works great!! but when the jeep has been ran awhile around town and then go to reverse it acts like its going to stall or it stalls out!! tranny filter and fluid change, was clogged, hasnt fixed the problem. cleaned acv and throttle body, and still the same problem. was told could be a switch on tran that is failing, but it isnt the nuetral safety switch, cant find any other switches? stumped!!! weird it runs fine when cold, but bad when warm, could it be a sensor going or what???? please help!!!!!!