|08-16-2011 10:46 PM|
|jesteban||I try it again, the first couple of time, still did not work, still made the humming noise like if it was stucked, then it started working. I called 4wd and they tell me I have 30 days to return it. I think I will try it for a couple of weeks. It seems to work fine. I wonder if the way the cable was wound was making too much tension, who knows|
|08-15-2011 11:58 AM|
|08-15-2011 09:40 AM|
|Redrider94||Send it back!!|
|08-14-2011 11:39 PM|
I just istalled my new Lang Power Hoist and the motor doeas not work. I got it from 4WD.com. IT took 3 weeks to get and not the motor does work work. Now what do I do?
|06-10-2011 08:36 AM|
|andreafahy01||I haven't ordered anything yet, but I couldn't take it anymore! I went over to the mechanics a block away and asked if they would spare me a few minutes and their manly strength, they were glad to oblige, hopped in the jeep and rode down to take my top off for me! I'm pumped to finally have it off!|
|06-06-2011 07:34 PM|
Hoist are over rated. Just slide the hard top back as far as you can go until its balanced perfectly ( open the back window first so it cant pop back up and throw you off balance ) Then go to the back and balanced on the top of your head and use your arms to keep it steady. Pick it up that last few inches and then walk backwards until the top is clear of the tail of the jeep. Then squat down and gently lay it on the ground. Crawl out from under the top and remove your doors and your ready !
Installation is the reverse of removal except you balance it on your back instead of your head then military press it up above your head. Presto !
|06-06-2011 04:30 PM|
|jp4fun||I talked to Wes at 4 Wheel Parts 877.474.4821ext 5637. He made sure I got the right hoist for my application. Sorry I never got around to posting pics. I haven't had time to dig out the camera.|
|06-06-2011 03:41 PM|
|04-12-2011 12:59 PM|
|jp4fun||I'll try to post pictures later. In the mean time,You can download installation instructions from Quadratec that will give you a good idea of how it will look.|
|04-12-2011 12:50 PM|
|04-12-2011 12:47 PM|
|jp4fun||I looped my line through a pulley and back up to the winch frame cutting the winch speed in half. Even at that speed I only run the winch 2 to 3 seconds total to remove and put back on. I don't think you would notice the difference in power consumption plus this makes it easier to guide the top on and off. That is why I opted for the power unit in the first place. Food for thought.|
|04-12-2011 12:32 PM|
volsjp, is your setup much like mhaines? I need a fair amount of visuals if I'm even going to think about getting handy right now!
And, jp4fun, I'm not against the greater expense of the power hoist, I just usually try to do things that minimize my electrical consumption, thus looking at the manual and crank models. I'm looking at the power model right now, I'll be brutally honest, I don't even know what I'm looking at! I've become total girl over the past several years and can't seem to figure anything out anymore! Lange Originals 014-389 - Lange Originals Power Hoist-a-Top™ for 76-06 Jeep® CJ-7 & Wrangler YJ, TJ with One Piece Hardtop - Quadratec lame
|04-12-2011 12:22 PM|
|jp4fun||I dropped the dough for the Lange power hoist. Ceiling mounted the winch, put together the frame and popped the top. About 3 hours. Could have been quicker, I just took my time. I did have help with the winch though; its pretty heavy to hang by yourself. Could not be happier. I paid $400 delivered. I'm sure there better deals but it is still worth every penny to me.|
|04-12-2011 12:20 PM|
|volsjp||I second the hf hoist. I love our HF.|
|04-12-2011 12:06 PM|
|andreafahy01||smart set up! I, however, am not feeling particularly handy lately! That is a pretty massive sale on the HF hoist!|
|04-12-2011 12:02 PM|
|mhaines||I made a frame out of 1" square tube, hooks, and pipe insulation and bought this electric hoist at harbor freight. Works great. Less than $125 including hoist|
|04-12-2011 11:41 AM|
Crank vs. Manual Hoist-A-Top for my YJ ?
Construction of our new house is nearly complete! This means I'll have a place to install a hoist for my YJ's hard top in time for the weather change. Any opinions on the Lange Originals Crank Hoist-a-Top Lange Originals 014-488 - Lange Originals Crank Hoist-a-Top™ for 76-06 Jeep® CJ-7 & Wrangler YJ, TJ with One Piece Hardtop - Quadratec vs. the Manual Hoist-A-Top Lange Originals 014-388 - Lange Originals Manual Hoist-a-Top™ for 76-06 Jeep® CJ-7 & Wrangler YJ, TJ with One Piece Hardtop - Quadratec ?