|07-02-2011 06:32 AM|
If you don't mind spending the $145. The JKS quicker disconnects are about as rugged as you can get and they are adjustable for more height later down the road!
It sucks to hear these problems, but once again another reason I love WF.. the companies chirp in and get real world information on their stuff!
|07-02-2011 05:01 AM|
|07-01-2011 07:20 PM|
BUT>>>>what we all want to know is did you ever land that helicopter on your Iphone?
|07-01-2011 05:17 PM|
|Rich331MX||Oops, I meant if the zerk fittings would hit anything if I did not use a quick disconnect kit...|
|06-30-2011 11:42 PM|
I recently left the drag racing world to play off-road. I was going to order this kit, but don't understand if the QD zerk fittings would hit or rub if I just order a regular 1-3/4 spacer kit with the sway bar link extensions and bolts that come with the kit?
|06-20-2011 06:26 AM|
|dustyc||I have read other post that indicate I'm not the only one to have this issue with Teraflex bushings. Guess I should look at other options myself.|
|06-20-2011 05:39 AM|
Six months? Damn... I have had the Poly's on now since December (so 7 months and about 8,000 km) and they are still as tight to remove as they day they were installed.
Not only no sign of wear but no sign of even loosening off from the original install.
I think the Teraflex guys need to look at the compound being used in the bushes.
|06-20-2011 05:05 AM|
|2010WranglerMountain||Damn. I'm gonna have to keep an eye on that.|
|06-19-2011 07:47 PM|
|dustyc||FWIW, I just put my Teraflex leveling kit on about 6 months ago. Didn't see any issues with the zerk fittings or play in the bushings, but... After getting back from Colorado this past week I went to do my normal maintenance stuff when I noticed the bushings were disintegrating. I put a new set on today. See pics.|
|06-14-2011 05:36 PM|
pics for ya and a little info.
|06-14-2011 05:34 PM|
|2010WranglerMountain||oh, and no quick disconnects in this kit...they give you a couple bolts to secure the sway bar links.|
|06-14-2011 05:33 PM|
|2010WranglerMountain||QD is "quick disconnect" ...they are so you can disconnect your sway bar links to get more articulation out of your front end...I've had my kit on for a few weeks now and haven't had a problem...as far as it being changed, I've heard nothing.|
|06-14-2011 01:41 PM|
What does QD mean?
Are there real quick disconnects in this levelling kit?
Is the problem with these QD links solved?
Or will I have the same Problem after buying this kit?
|05-19-2011 09:01 AM|
Hey thanks for your response - its nice to see manufacturers responding. I must admit I was a little disappointed but the local supplier down here assured me thats how the links should be, but it just didnt seem right to me. For info's sake these were from late last year, round November or so in Australia. Feel free to contact me via PM if they want any details, happy to help.
I did keep the rear axle mounted trackbar bracket I bought at the same time - love it
|05-19-2011 04:10 AM|
|05-18-2011 08:57 PM|
I was all set on ordering the Teraflex 2" leveling kit because it included the swaybar links.
After reading a few threads, Im not so sure now.
A couple questions:
1. The kit lifts the front 2", the 2.5" BB lift kit includes shock and bumpstop extensions. So why is a shock and bumpstop extension not needed for a 2" lift, but is needed for a 2.5" lift? That last 1/2" must be hell.
2. Those swaybar end links look very light duty. What is the length needed for the 2" leveling kit? I have a great welder living down the street. Any reason why I couldnt have him cut mine in half and weld on a sleeve to lenghten them?
|05-18-2011 11:21 AM|
|TeraFlex||Thank you for posting these concerns and video about our swaybar links. I forwarded this thread onto upper management here and now TeraFlex is looking into improving these.|
|05-16-2011 04:29 PM|
Yep, thats how mine were. When I sent the email to my supplier he didnt seem overly surprised at what I was telling him, in fact seemed to indicate a lot of people like the extra freeplay as it softens the onroad ride.. !!!! WTF???
Na, that much slop and the design of the zirk setup in a brand new bush was enough for me to say no thanks. That video I linked to was from before the vehicle left the driveway, just installed both sides and was looking at it thinking you have to be kidding me. Then did some research and strangely found no else complaining of the same problem, but quite a few complaining the bushes didnt last to long (as in at least a set a year)
|05-16-2011 12:03 PM|
|2010WranglerMountain||it seems like mine would do the same thing...they seem to have a lot of play and they haven't even been on the vehicle yet|
|05-16-2011 07:52 AM|
I sent mine back for that reason, and for the fact that once installed the slop in the bushes meant the sway bar could move well over 1/4 inch compared to the diff the links were holding it to - and that was just by using my hand on the plastic mudguards. Oh, and the quick connect pins didnt lock into place, they just fell all the way down to the ends... and.... the retainer pin bracket that mounts under the body mount bolt dodnt fit in there properly as the washer built into the nut was to wide to fit within the bracket, causing it to tilt sideways! Poor design from a reputable company.
Here's a video I sent to the local supplier to show him what I meant.
YouTube - P1010538
Also after screwing the zirks in far enough so they wouldn't simply fall out they were chewing into the loose fitting bushes. The bushes were fitted so loose that trying to grease them resulted in the grease simply oozing out right where the zirks are. I was very disappointed and my local supplier took them back without question. I did keep the rear axle mounted track bar lift bracket - that is a great design and I am very happy with it!
I replaced the QD's with a set from synergy/poly performance. Very happy with them.
The bolts that you remove are only around the 55 to 75 foot lb from memory.
|05-16-2011 07:31 AM|
Teraflex QD link question...?
I just got my Teraflex Leveling kit in the mail and after opening the box (at work cause I couldn't wait till I got home) I find that the grease zerks at each end of the QD Links come in contact with the rubber bushings on the inside and that's just when they are in finger tight and you can still see a thread or two showin.......
So, is this suppose to be this way?
If this is a dumb question please forgive me for my ignorance
Also, does anyone know what the torque specs are for the components that I'm going to have to remove/replace?