|07-27-2013 05:15 PM|
|rodelliot||OK, I'm pretty much clueless about mechanical stuff. Just got my YJ ('93) a month ago and the rubbing has been driving me crazy. Thanks for the link arcountryboy; couldn't have made it any easier than that!|
|06-15-2011 06:37 AM|
|arcountryboy||Jeep Steer Stop Adjustment|
|06-14-2011 09:25 PM|
Thanks, I plan to add just one of the front left and go from there. after yesterday I have visible rubbing and wear on my control arm, so I need to prevent that. thanks!
Shelby, thanks for the very good description
|06-14-2011 08:03 PM|
Can't imagine you would need more than 2 washers on each side. Even 1 washer on each side makes a big difference.
I've never noticed much difference in the turning circle but full-lock turning in reverse is certainly affected.
|06-14-2011 04:44 PM|
Back of the spindles, look for a 5/16" bolt sticking out. It will look like its threaded into a nut on the spindle. Remove the bolt, the nut will come with it, it's welded to the bolt.
Stuff a couple of washers under the nut, reinstall the bolt. Do that same on the other side. Check for rubbing. Add more washers as needed.
Adding the washers moves the bolt out, so it hits the stops sooner.
You've now adjusted your steering stops.
|06-14-2011 04:39 PM|
|6InARowMakesItGo||i don't know how to adjust them or even if they can be. most people just use washers.|
|06-14-2011 04:12 PM|
How to adjust steering stops?
Could someone throw me a bone and give me a little tutorial on how to adjust the steering stops?
I want to prevent rubbing on my lower control arms up front. It only rubs on alot of flex at full turn. and Its not worth blowing the money for new wheels yet.