|06-25-2011 10:50 PM|
|06-25-2011 12:06 AM|
|06-24-2011 09:50 PM|
|hughesa57||How far are you from st. Charles Missouri ?|
|06-24-2011 05:07 PM|
|hughesa57||How's it run on the freeway? I do mostly daily driver type street driving, but the weekend trips into the dirt sometimes require 100-200 mile trips. Would the 904 be the best option?|
|06-24-2011 04:54 PM|
|Ibuildembig||for both Id take 600, came from running 89 with 125K on it|
|06-24-2011 04:51 PM|
|hughesa57||How much you lookin for?|
|06-24-2011 04:44 PM|
|Ibuildembig||a long way from that lol....southeast missouri|
|06-24-2011 04:43 PM|
|hughesa57||I'm in las Vegas Nv. You?|
|06-24-2011 04:31 PM|
|Ibuildembig||If you swap to an AX-15 you will have to get a 23 spline input transfer case too as the case you have now is a 21 spline. If you want to swap to auto you need a 904...where you located? I have one with a case on it read to go.|
|06-24-2011 04:28 PM|
|hughesa57||I have the BA-10. So I guess ill switch to the ax-15 if I want a manual, any suggestions for a tranny If I decide to go with an auto?|
|06-24-2011 04:48 AM|
|06-23-2011 09:55 PM|
|hughesa57||Awesome. Thanks a bunch.|
|06-23-2011 07:08 PM|
Here is a link to a BA-10:
Peuget BA10 Manual / Standard Transmission Parts and Diagram
For ax-15 external slave 1994 and up as i recall.. ax-15 is good trans, not sure what all is needed for swap though.
|06-23-2011 09:03 AM|
First off, yes 5 speed, sorry!
Are there markings on the tranny that will tell me which tranny it is?
Also I want to change to an exterior slave cylinder, is the ax the best to do that with?
|06-23-2011 07:25 AM|
|4Jeepn||What trans does it have now? 4 speed does not sound right? in 88 for the 4.2 would have been left over BA-10 5 spd or newer AX-15 5spd. Novack and advance adapters can help you out on the the parts you would need. T-case should be np231, unless you have the carry over np205(?). Might have to change input gear.|
|06-23-2011 07:02 AM|
88 jeep wrangler questions
Hey guys, thanks for having me! I have a few quick tyranny questions on my jeep, first the back story.
1988 jeep wrangler 4.2 258
It currently has a manual 4 speed with over drive, im not sure which specifically.
I want to switch to an automatic ...so...
Which tranny do I need to make it happen? Do I have to replace the T.C. as well?
Or lets say we we stay with an manual,
Will the ax-15 fit my 4.2? Everything I have found so far says just the 4.0?
I am planning to replace the tranny soon,