|09-18-2007 05:59 AM|
Perhaps one like this might work better.. its from a Jeep.... wagoneer.
|09-17-2007 11:28 PM|
|upinar||theres no way you can bend a pitman arm, i tried. I just ended up cutting a slit and smacking the crap out of it with a sledge, and finally when it moved, i welded the slit closed. Its good now|
|09-17-2007 10:43 PM|
|09-17-2007 10:35 PM|
|AzTJ||This has disaster written all over it.|
|09-17-2007 10:15 PM|
if the angles arenĀ“t correct there will be some steering problems.
|09-17-2007 10:10 PM|
|KendallSwamper||Have you tried heating up and bending the stock pitman arm?|
|09-17-2007 08:34 PM|
straight pitman arm
I just finished installing the teraflex high steer kit, i had to fab up a track bar that mount on top of the steering stabilizer mount. After does that my angles are a little off, not by much but just not perfect. I have the stock pitman arm on but it would be good if it did not have that drop in it. Is there a pitman arm that is straight that will work with the jeep that i can buy. Thanks