|07-17-2011 03:13 PM|
|07-17-2011 12:42 PM|
|TroyR219||Just pay the $30 when you have an order with quadratec next... its $30 people... goes in in about 5 minutes and works great. no worries either. Looks factory and complete to. Not just a wire running here with a toggle somewhere else.|
|07-17-2011 11:36 AM|
But, my fuse #4 is also still sitting in the tray by the TC shifter. Been there for a couple years. It's pretty dirty. I may have to wash it.
|07-17-2011 11:30 AM|
|jgorm||I have a switch on the drivers door switch so I can have the door open and turn the buzzer off. When I pull the doors, I pull the fuse.|
|07-17-2011 11:26 AM|
|07-17-2011 11:09 AM|
|KidRock171||That's pretty cool. I might do this just because I have an odd addiction to switches. I'll do random things just so I can't put another switch on my dash somewhere.|
|07-17-2011 08:39 AM|
|07-17-2011 01:11 AM|
|Powder Monkey||I'm the loser with the metal clips. Tacked them on to some quad order. Pulling the fuse is fine unless you forget to turn your lights off|
|07-17-2011 12:52 AM|
Pulled my fuse the day I bought the Jeep. 6 years later its still laying in the bottom of the glove box.
|07-16-2011 10:35 PM|
|07-16-2011 10:19 PM|
|BigGreen98||Wow! Thanks for the support people! A hey that's a great idea would have worked just as well! :-( J/K|
|07-16-2011 10:06 PM|
|tat2dbaldguy||just pull the fuse when I pull the doors, think it is # 4 but it is a built in bypass|
|07-16-2011 09:25 PM|
|Mikekaz1||I just keep the fuse out permanently. You can still twist the light plunger and turn them on if necessary and it didn't cost me a penny or a second of time for that mod!|
|07-16-2011 09:16 PM|
|JYJeep||I like the tech, low cost solution, but my spouse bought me the spring loaded clips. They work and I like that my wife bought something for my jeep...|
|07-16-2011 09:14 PM|
|C.L.||Make sure the wire leading to the fuse/switch is well insulated. A short anywhere before the relocated fuse is no longer protected.|
|07-16-2011 04:37 PM|
|flyfishnevada||I saw that bypass somewhere else. Much better than pulling the fuse. I gotta track down a short before I do that. Mine come on whenever the heck they feel like it, even when the fuse is pulled.|
|07-16-2011 04:10 PM|
Tired of fighting your dome light?
I don't know about you guys, but today I got tired of pulling out the dome light plungers when I remove my doors. So I go a toggle switch an online fuse and some wire. Literally 1.00 worth of stuff I had laying around. I bypassed the fuse in the fuse panel and mounted it under the dash. Now when I take off the doors I just flip the switch. Took about 30 min. For free I have the exact same thing my cuz ordered from quadratec for 30.00! Go me!