|07-21-2011 02:04 AM|
|N.Miner||Thanks for all the help guys it worked perfect! Now on to the next project....|
|07-18-2011 11:59 AM|
can you find the "hot" wires out under the hood on the driver's side plug? Hint one of them is for the horn. Unplug and use test light to complete circuit--actually think mine on my '04 sport were blue and blue with brown stripe. Eliminate the "good" ones other 2 should be the fogs. run wire from battery to toggle with fuse/relay--and than to fog lights AFTER the plug. I also cut the fog light wiring from the plug so can't feed backwards.
Just a suggestion.
|07-18-2011 11:53 AM|
|N.Miner||Thanks allot for the link, the articles and pictures were awesome. Problem is it didn't work. I cut the white/orange wire and spliced into either end then ran them to a switch. Still wouldn't turn on though|
|07-17-2011 11:55 AM|
|Hardermods||Check out this thread fog lights don't work|
|07-17-2011 12:10 AM|
|07-17-2011 12:04 AM|
Fog light wiring
Hi guys first time jeep owner and first time on this forum! hopefully I can get a little more help than I have been getting.
I have an 04 Jeep Wrangler Willys edition. I had a problem with the Multifunction Switch (apparently thats a common problem) and had to replace it. The problem is, my parents got a multifunction switch that did not have a fog light option while i was in Afghanistan. (Im in the Marine Corps) So I figured no problem, Ill just install a toggle switch.
Problem. I dont know what the wiring is for the fog lights. Ive looked at both Chilton and Haynes manuals for wiring diagrams but cant find any that name the wires. Can anyone help? Im looking to either run a toggle switch off the wiring in the steering column, or splice the fog light wiring into the headlight or running light wiring and get a bigger fuse.