|07-20-2011 12:20 AM|
|444||There's an offenhauser and a clifford brand 4bbl on the market. If you do a search on ebay for a 4.2 intake or 258 intake you will probably stumble onto one. I'm not sure but I think summit may still sell them new but not sure.|
|07-19-2011 12:40 PM|
|brent in az||Only prob is I don't think Jeep ever made a 4BBL intake manifold for a 6 cylinder. But I'm sure there is one on the aftermarket.|
|07-19-2011 05:39 AM|
|n2trucking||awesome thank you. what kind or where could i find a 4bbl intake manifold for the stroker with the 4.0 head? Did a certain kind of jeep model have a 4bbl intake that would fit a 4.0 head?|
|07-19-2011 01:38 AM|
|brent in az||I've done this on a Jeep J10 and 444 is all correct. If you sunk this much into it so far you might as well make the manifold 4 barrel, too if one's available.|
|07-19-2011 12:01 AM|
Yes, with a little bit of modding you can put a 4.2 carb intake onto a 4.0 head or vice versa. From what I've read you basically end up having to open up one or two of the bolt holes into an oval.
I would find a 4bbl intake/carb if you're doing a stroker and/or a 4.0 head because the stock 2bbl 4.2 intake looks like it flows so terribly, and limits you to a 2bbl carb.
|07-18-2011 01:42 PM|
Carbed Stroker engine??
Can i use a carb on a stroker engine? My 1990 4.2 engine is dead so i wanted to get the stroker but i read up on it and it says it's a injected engine but want to know if i can use a carb on it. I don't feel like messing with getting 4.0 wireing to make this engine work so some info would be great. Thank you