|09-30-2007 11:38 PM|
|09-30-2007 08:22 PM|
For the front bar i ran the wires inside the pipe that connects to the windshield (drivers side). There are 2 holes in it, one in front and one in back.. goes in one, comes out through the other one. It was a pain in the butt and i had to use tweezers to pull it out but it was better than cutting the patting off. I first ran a skinny wire and then tied the big wire to it and pulled it through.
|09-30-2007 08:14 PM|
|baddandy||It should be on the other side of bar behind seatbelt retractor|
|09-30-2007 07:21 PM|
|foxinthemudd||no the one in the rear does have a zipper on it. I'm guess I'm just confused on where to look for the connector and I guess I'm gonna have to cut the padding on the front unless I only use one sound bar and put it behind the center roll bar.|
|09-30-2007 07:15 PM|
the roll bar patting in the rear doesn't have a zipper on? Mine does. As the roll bar patting that goes to the front windshield i just shoved the wire in there and left it this way. No problems so far.
The harness should be white and fro memory it was 6 or 8 plugs in it but only has 6 metal things sticking out (4 for speakers and 2 for the light) .. It should be at the top edge of the roll bar behind to the right (above) the drivers seat
|09-30-2007 07:06 PM|
well now I have two. lol. just not in the jeep yet. they are on the way. but no sound bar in it currently. its weird cause the roll bar padding isn't cut so that it can fit a sound bar on the front or rear side. I can't wait for the bars to get here so I can get them in. Oh and I also ordered a new 10" kenwood sub, cause I blew my old P.O.S. out and it sounds like your shakin a can full of rocks.
now when were talking about the harness being taped to the roll bar under the padding on the drivers side....does anyone have a pic? or can give me an example of what type of connection I should look for?
|09-29-2007 11:37 AM|
So Fox you don't have a sound bar at all?
|09-29-2007 02:07 AM|
|foxinthemudd||maybe I really need to look around the jeep for that damn harness, I can only hope that its hooked up.|
|09-29-2007 01:48 AM|
|baddandy||I got the $139 6 speaker one, sounds awesome and it looks like the plastic is paintable. Wire harness was taped to driver side upright|
|09-29-2007 01:39 AM|
|foxinthemudd||actually I bought one of these bars already now going for another set maybe sell the first. the guy said that he would send me a black one cause he has a ton I guess. but as for the second maybe even third set I might just turn around a sell them on craigs list or back on ebay for 100 or so.|
|09-27-2007 08:52 PM|
|09-27-2007 08:21 PM|
|Dare2BSquare||You gonna spray paint the fabric covers that are on them according to the description?|
|09-27-2007 08:10 PM|
|4point||On my roll bar the factory wires were just taped to the outside of the bars under the padding.|
|09-27-2007 03:38 PM|
|09-27-2007 10:34 AM|
|dweebster||no you can run the line through you roll cage bar i am selling some pod speakers too if your interested.... :-P fits any tj and it alreadys has 5.5 inch pioneer permier 700 watt and db tweeters|
|09-27-2007 04:45 AM|
|foxinthemudd||well I don't have any bar or pods currently is there a connector that might be somewhere or do I have to splice and dice?|
|09-27-2007 04:28 AM|
|AzTJ||Should be a pretty easy swap, cut wires and connect new ones.|
|09-27-2007 04:06 AM|
|foxinthemudd||thanks Az I think that I will probably pick it up. maybe post it on craigs list for more and see how much I can get out of it. then buy some pods. I'm guesing when you say the preinstalled crap you mean the speakers. how hard will this be to wire to my current system?|
|09-27-2007 03:40 AM|
|AzTJ||For a sound bar that a helluva deal! Just be sure to replace the pre-installed crap. As for color, depending on what its made of, you could probably get away with a rattle can.|
|09-27-2007 02:02 AM|
hey guys I was lookin at this on Ebay. I've been looking for something for more sound in the heep. I really like the look of the sound pods, which might be in the future but for the price of this its kind of hard to argue with the price.
one more thing is there a way I could change the color of this (ie. spraypaint, ect...) thanks in advance