|08-08-2011 03:31 PM|
|Will George||1.25 body lift, and bumperstops and im good, thanks everyone. next thing is i do have stock gearing. i dont know what it is on a tj i think its 3.07. do i need to do anything with that? or am i good to go|
|08-05-2011 12:05 PM|
the stock fenders have an opening for the tires to tuck into, nearly flat to the fender.
whats most important is correct bumpstop length...otherwise you can rip up even the higher clearance stock fender...with a 31" tire on 2" of lift.
|08-05-2011 11:33 AM|
|GoldenSahara00||You don't gain any clearance with flat fenders, only with high lines or cutting. And I know alot of people don't want to start cutting yet. there is nothing wrong with a good BL.|
|08-05-2011 06:36 AM|
You start hitting snags like brake lines aren't long enough, shifter hits the body and won't get all gears( can occur at 1.25" as well), fuel tank lines need extended, transfer case linkage issues. Get a jks , or savvy 1.25" body lift and be done with it.
|08-05-2011 05:57 AM|
|Irongrave||get some flat fenders no need for a body lift ot if you want cheaper just start cutting (look into the DIY highline conversions)|
|08-05-2011 04:51 AM|
|TJ32141||3:07 gears or 3:73? 35's are tall, you might cause other problems.....|
|08-05-2011 01:46 AM|
|Will George||sounds like i should get a 1.5 inch bl and some bump stop extensions. thanks everyone. anyone have an idea how much money thats gonna run? hopefully the just empty every pocket rule isnt coming into play|
|08-04-2011 04:19 PM|
|08-04-2011 04:16 PM|
|rda616||I am running a 1" body lift and a 3.5" suspension lift with 35" tires. You don't need more lift you just need proper bump stops! And if you want more lift then a 1.25" body lift at most!|
|08-04-2011 03:47 PM|
|GoldenSahara00||add .75 spacers, chances are your springs are sagged some so it wont hurt your shocks, and a 1.25 BL. you can run 35s on that as long as your properly bumpstopped.|
|08-04-2011 03:46 PM|
hey everyone, i have a 99tj sport straight 6 running a 5 speed. right now i have a 4 inch lift (suspension) and 32 muds. id like to step up to a 6 inch lift on 35s. someone told me spacers were an option, or adding a 2 inch body lift. i know suspension lifts are a lot better, but i dont wanna take apart my 4, sell it, and then find a 6 to buy. let me know what my options are on that. thanks in advance.