|12-02-2014 10:01 PM|
|12-02-2014 05:31 PM|
|12-02-2014 04:44 PM|
|12-02-2014 04:37 PM|
|12-02-2014 03:53 PM|
i had to trim my front fenders. i also added the little 3/4 led light in the fender well.
|12-02-2014 03:19 PM|
|11-28-2014 08:48 PM|
|11-28-2014 10:07 AM|
|11-28-2014 04:58 AM|
|imnotaniceboy||Can anyone please tell me if I would be able to use 33's with this mod on a stock tj?|
|09-19-2014 09:56 PM|
|09-19-2014 09:54 PM|
|clull05rubi||4get cutting buy real fenders|
|09-19-2014 09:47 PM|
Cut mine a last weekend.
Love the extended clearance. Its a shit show when it rains tho.
Luckily it doesnt rain often.
Before and after...
|07-10-2014 08:27 AM|
Where I installed my LED, there is a hole in the metal (covered by the plastic fender material, that is about 3/4" or so in diameter. Drill a hole through the plastic in that location and you won't need to cut through any metal.
Pop the light in, the included grommet will help hold the light in place.
|07-09-2014 03:48 AM|
|dgthtjhtZDF||Very nice! How did you do it?|
|07-08-2014 09:26 AM|
|07-07-2014 12:56 PM|
|918redtj||How did you guys mount the side marker lights under the fenders? What kind of tools did you use to drill the hole? I just cut mine yesterday and can't figure out how to get a light mounted under the fenders. Thanks!|
|06-12-2014 12:16 PM|
|TXHillCountryTJ||Continuation of the photos.|
|06-12-2014 12:15 PM|
Hey all, I appreciate all of the info from this thread. With it I did mine the other day. Here are the results. The LED turn signal I used is set up for 12 volt so there is no issues with the flasher.
In my '01 there is a hole in the sheet metal just behind the flare and these fit perfectly after I drilled a 3/4" inch hole in the flare.
|04-23-2014 09:25 AM|
|coolhand||My front is still just trimmed then I've added on the back, so I don't get hassled by authorities that like to hassle lifted Jeeps, so I'm told?, for the still flat look on back will do front soon, going for praticality not looks, old school I guess.|
|04-22-2014 10:26 PM|
|Preston-||Do any of you guys have a video of you cutting them? None on YouTube.|
|03-05-2014 03:49 PM|
|03-05-2014 03:46 PM|
|02-25-2014 06:04 PM|
|gcampos24||Almost done myself. Ready for paint.|
|01-10-2014 01:22 AM|
|wranglertj2001||this looks awesome! i didnt like the price of new flat fenders either and personally i think this look better than some of them even! plus you keep your front turn signals too.|
|01-06-2014 08:18 PM|
|01-05-2014 03:01 PM|
|Kevin063||I'm definitely picking up some of the 6" stock style fender flares and see if I can chop them up like this. I'd like them to be a little wider than they would be cutting my stock ones. Everyone's looks great, I'm super excited for my next little project!!|
|01-05-2014 02:50 PM|
I'm still running the stock trimmed rears with my flat fenders. The remaining lip is about the same as the MCE Flattys.
|01-05-2014 02:21 PM|
|01-05-2014 01:35 PM|
Mine before I hacked the rest of the front fender off for MCE's.
Before with Stock flares
After with Trimmed flares
|01-05-2014 12:59 PM|
|This thread has more than 30 replies. Click here to review the whole thread.|