|09-19-2014 09:56 PM|
|09-19-2014 09:54 PM|
|clull05rubi||4get cutting buy real fenders|
|09-19-2014 09:47 PM|
Cut mine a last weekend.
Love the extended clearance. Its a shit show when it rains tho.
Luckily it doesnt rain often.
Before and after...
|07-10-2014 08:27 AM|
Where I installed my LED, there is a hole in the metal (covered by the plastic fender material, that is about 3/4" or so in diameter. Drill a hole through the plastic in that location and you won't need to cut through any metal.
Pop the light in, the included grommet will help hold the light in place.
|07-09-2014 03:48 AM|
|dgthtjhtZDF||Very nice! How did you do it?|
|07-08-2014 09:26 AM|
|07-07-2014 12:56 PM|
|918redtj||How did you guys mount the side marker lights under the fenders? What kind of tools did you use to drill the hole? I just cut mine yesterday and can't figure out how to get a light mounted under the fenders. Thanks!|
|06-12-2014 12:16 PM|
|TXHillCountryTJ||Continuation of the photos.|
|06-12-2014 12:15 PM|
Hey all, I appreciate all of the info from this thread. With it I did mine the other day. Here are the results. The LED turn signal I used is set up for 12 volt so there is no issues with the flasher.
In my '01 there is a hole in the sheet metal just behind the flare and these fit perfectly after I drilled a 3/4" inch hole in the flare.
|04-23-2014 09:25 AM|
|coolhand||My front is still just trimmed then I've added on the back, so I don't get hassled by authorities that like to hassle lifted Jeeps, so I'm told?, for the still flat look on back will do front soon, going for praticality not looks, old school I guess.|
|04-22-2014 10:26 PM|
|Preston-||Do any of you guys have a video of you cutting them? None on YouTube.|
|03-05-2014 03:49 PM|
|03-05-2014 03:46 PM|
|02-25-2014 06:04 PM|
|gcampos24||Almost done myself. Ready for paint.|
|01-10-2014 01:22 AM|
|wranglertj2001||this looks awesome! i didnt like the price of new flat fenders either and personally i think this look better than some of them even! plus you keep your front turn signals too.|
|01-06-2014 08:18 PM|
|01-05-2014 03:01 PM|
|Kevin063||I'm definitely picking up some of the 6" stock style fender flares and see if I can chop them up like this. I'd like them to be a little wider than they would be cutting my stock ones. Everyone's looks great, I'm super excited for my next little project!!|
|01-05-2014 02:50 PM|
I'm still running the stock trimmed rears with my flat fenders. The remaining lip is about the same as the MCE Flattys.
|01-05-2014 02:21 PM|
|01-05-2014 01:35 PM|
Mine before I hacked the rest of the front fender off for MCE's.
Before with Stock flares
After with Trimmed flares
|01-05-2014 12:59 PM|
|10-24-2013 02:16 PM|
I did this mod on my 97 auto 4.0 when I owned it (sold to a friend and now I have a 99 manual 4.0)
I used a dremel to cut mine and it took probably around 20 min.
putting that edging on took the longest, needed a flat head to help spread it open to get onto the fenders
I did end up bedlining them but its not in this picture (33's on a stock suspension)
|10-24-2013 11:30 AM|
I just did this. Awesome, cheap as thing to do!!!
Two things to add.
1. Using a box knife, the higher the temp of the plastic the better. Do it on a hot day. It will cut like butter. I noticed a substantial difference in ease of cutting between even the sunny and shady side. IMO anything but a box knife would be overkill for this task.
2. Easiest to cut them mounted on the vehicle. I had my rear ones off for something semi unrelated and cut them while not mounted. It was a bit of a pain.
|09-29-2013 01:53 PM|
|mudboy71||Well here is the finished product with the exception of some touch up paint.....|
|09-29-2013 02:51 AM|
|09-29-2013 02:44 AM|
|Slater451||I like the bumper... Are the fogs still in there stock ish spot??|
|09-29-2013 01:04 AM|
|mudboy71||Update...I work nights so I stay up all night when I am off....sooooo....got bored and went back out and trimmed up the fenders.....looks pretty good so far....I will post pics tomorrow....gotta take another shower now.......lol|
|09-28-2013 09:58 PM|
I pulled my flares today to paint them to get me by until I could afford some Poison Spyder Defenders....Anyway, after I got them off, I kinda liked the way my fenders looked without the flares.....I would say from the pics I have seen of the Defender Fenders, that the stocks without the flares give me about the same clearance or at least they will with a little trimming.....Went to Oreiily and bought 3/4" LED markes lights and mounted them then scribed my cut lines.....Haven't made the cuts yet...Wasn't comfortable doing it with a sawzall.....Gonna get a cutoff wheel tomorrow and have at it....I did go crazy with the sawzall on my front bumper.....lol.....Hope Yall Like.
|09-09-2013 08:34 AM|
|09-09-2013 05:37 AM|
|Sblanck||I used an ordinary box cutter. Did mine Saturday while it was 100 degrees and it was like cutting butter.|
|This thread has more than 30 replies. Click here to review the whole thread.|