|10-07-2007 09:15 PM|
|mrbigjeep||misread original post...thought you were gonna run them all the way around...including in the rear...which would jack up driveline angles|
|10-07-2007 02:10 PM|
|10-07-2007 02:05 PM|
my OME HD spings sagged 1.75-2" after i installed my winch.
|10-07-2007 02:03 PM|
I just want to stack the fronts. Already have mml. front sags about 3/4" from the winch.
|10-07-2007 01:37 PM|
|10-07-2007 01:36 PM|
it will be ok.
the height will be the same as before because of the winch weight.
i have 2" spacers on top of 2.5" OME springs to level out my TJ and everything works fine.
|10-07-2007 01:07 PM|
|mrbigjeep||you are gonna stack spacers? i think you can get away without new CA's but your axles will be uncentered and you will most likely need a tcase drop...you may can get by without one if you have a MML.|
|10-07-2007 11:12 AM|
Spacer lift question
I have a 2" BB already, I'm thinking of putting a 3/4" spacer in the front (to make up for the winch), Will I run into any problems having stock control arms or any thing else? I know really need to save up for a 4" lift, but funds are lacking right now. Any advice is great.