|08-17-2011 03:27 PM|
The best way to avoid it is preventive measures when applying. You can either A) avoid applying any wax at all along the fenders, or B)Use blue painter's masking tape on the fenders prior to applying.
I use Ultima spray wax (My experience with it is lasts longer than Turtle Wax ICE spray wax) after washing. It extends the life of the paste wax application I do 2-3 times a year. I will either apply carefully or tape the fenders during those applications. I don't bother with any preventive measures with the spray wax, it does not leave a residue as long as I wipe it off.
Apply 303 or Ultima Tire & Trim Guard on the fenders after that and you're all set.
|08-17-2011 02:39 PM|
|ed0985587||I got some turtle wax ice car wash and turtle wax ice detailer spray. will go out in a bit and test it out, the car wash stuff is "supposed" to be guaranteed not to waterspot.|
|08-16-2011 10:32 AM|
|ed0985587||I appreciate the responses. Also the "its a jeep, don't wash it" responses lol. It may be a Jeep but its a Jeep i just paid 30k for, keeping it nice is a must. I have a YJ I can use for the dirt stuff.|
|08-15-2011 04:44 AM|
|08-15-2011 12:57 AM|
|08-14-2011 03:31 PM|
|08-14-2011 03:18 PM|
i agree ONR is amazing!
its raining like hell here....tomorrow is a good day for an ONR WASH
|08-14-2011 10:53 AM|
|bbtj||I thought washing a Jeep voided the warranty, figured Chrysler would consider a "modification."|
|08-14-2011 07:30 AM|
|08-13-2011 06:48 PM|
OK finally got off my butt and took a couple of pictures.
See the wax that is on the fender flare I am wanting to get that out/off so fenders are just plain black plastic again.
|08-13-2011 04:08 PM|
|bc3_Jeep||Washed my 89YJ TWICE (once because the kids wanted to.....and ONCE because the Canadian Government MADE me)....... damn thing was pissed at me for a month each time.....never ever washed the 75CJ5......have never washed the 95YJ.......or the 82CJ7.......not even if they passed a law requiring it.....|
|08-12-2011 09:28 PM|
|08-12-2011 08:38 PM|
|HillbillyJeeper||Dont want the mud to slide off!!! Muds whats holdin the drivers side fender on!|
|08-12-2011 08:18 PM|
Great stuff--smells great too
|08-12-2011 08:15 PM|
I love the "it's a jeep" comments
Yes- I do realize that I'm driving a Jeep, and i I paid close to $25 grand for it. A good wax and the mud just slides right off
|08-12-2011 07:57 PM|
|08-12-2011 07:55 PM|
|08-12-2011 06:33 PM|
|HillbillyJeeper||Its a JEEP!!! N'uff said.|
|08-12-2011 05:55 PM|
|SylvanSahara||start w/ a clean car a good wax, dont wash/dry your car in high heat and direct sunlight if at all possible especially w/ dark colors and black. and like mentioned above Meguiars quick detail does a lot of good getting rid of them also. addionally if you hand was at home use a good specific "car wash" soap to wash car not a liquid dish soap or similar, the car wash soap is designed to reduce water spotting. good luck|
|08-12-2011 05:49 PM|
|ShaunWV||I have two black vehicles, and the only surefire way that I have came up with is to never let your vehicle air dry. Keep it wet, dry with a shammy, and then "final dry" with a microfiber towel.|
|08-12-2011 05:48 PM|
|Deaf1||Ok how do you remove wax that has gotten on fenders & hood latches? I am getting some areas where the wax is showing bad, I want the plastic to get back to black.|
|08-12-2011 05:33 PM|
|08-12-2011 05:31 PM|
|bc3_Jeep||You people actually WASH your Jeeps?????? I am AGHAST!!!!!!!!!!!!!!!|
|08-12-2011 08:44 AM|
It's a Jeep...it looks better dirty
Darker vehicles (expecially black) are notorius for water spots...lighter cars are not so bad. That's why you should dry your car in the shade (quick), and hard water does make it worse.
If you need to remove water spots that have already hardened, you can use a 50/50 mixture of distilled vinegar and water to get rid of it. Just make sure you rewax that spot...or you can buy commercial water spot removers (IMO, use the vinegar/water...it's free since you should aready have it in the kitchen).
Keeping a good coat of wax does help the spots from becoming a permanent addition to your paint over time. You don't need to spend a lot of money on a decent wax...but there are some advantages to the more expensive stuff (and there are a lot of them out there...your choice on brands)...I usually use the Wolfgang products from autogeek on my Vette Z06 for shows.
Here is a pic of the Z after wash, polish, wax (the whole nine yards) with the Wolfgang products (finished off with Wolfgang Fusion Wax/Sealant).
|08-12-2011 08:41 AM|
|Bazzer||I live in a hard water area so get water spots after every wash. Meguiars Quick Detailer removes them all after a wash and dry|
|08-12-2011 08:17 AM|
|TheHighLow||water spots? lol, its a wrangler|
|08-12-2011 08:01 AM|
There are a lot of products out there that will help with the issue.
The best way to prevent it is proper washing techniques.
Water spots occur due to hard water. If you are on a well, you more than likely have very hard water, unless you have some sort of softner setup. Municipal water systems vary greatly on hardness.
Proper wash techniques include: always wash in the shade, only after giving the metal time to cool down. Warm sheet metal and/or direct sunlight are breeding grounds for water spots.
The best "product" out there I have found for prevention is Optimum No Rinse Car Wash ("ONR"). It is a water softener in addition to excellent car wash. It also reduces your water usage, so it is environmentally friendly. I've been using it on my black wrangler unlimited for 6 months. No scratches or swirls, and the only time I get water spots is after a rain if I don't get out there to wipe it down.
My process with ONR is:
1. Rinse off Jeep with water to knock off loose debris (sometimes I will do this at a Car Wash -- Hand wand with rinse only, I never go thru an automatic or use any of the hand wand's soaps or waxes.
2. Wash with ONR. Wipe dry with micro fiber towel.
3. Spray with a spray wax such as Ultima Spray Wax or Turtle Wax ICE.
4. Buff with soft microfiber polishing cloth.
|08-12-2011 07:51 AM|
My wife and I use Zaino products on all of our cars. We like it the best of all we've tried, but all of the high end stuff works well. It's just a matter of what you prefer. Zaino smells really good, some of the others are pretty nasty smelling.
The best way to not have water spots is to not let it air dry. While you're washing it, make sure it stays wet the whole time. Then when you're finished wipe it dry with a towel, but not just any towel. Use 100% cotton made in the USA towels, they are softer and will work better than imported stuff. Cloth baby diapers work well for this.
The first time you wash it use dish soap (then NEVER use it again) to remove any oily residue or dealer wax that may have built up. Then claybar it to lift out any surface contaminants, and there will be some. The worst is the rail dust from the train ride. These tiny steel flakes will eventually start to rust and give the paint a hazy appearance if there are enough of them. After the claybar treatment start in with your polish/wax of choice.
PM inbound on an unrelated matter.
|08-12-2011 05:50 AM|
|kjeeper10||Wax it of coarse and then maintain it with a product like Meguiars quick detailer and a nice soft microfiber cloth|
|08-12-2011 03:21 AM|
|kfdjason7620||I had to use the "clay bar" kit to get the spots off of my wife's silver commander, its made by turtle wax, it comes with the "wax stripper" that works GREAT for removing bugs and spots first, then use the claybar, but after you finish, the paint is very smooth, and lastly put some high quality wax on it|
|This thread has more than 30 replies. Click here to review the whole thread.|