|10-09-2007 03:40 PM|
|jeeper95yj||Goodyear Wrangler MTR's I love mine. They have aggressive tread, three ply sidewall, don't sound too loud, but have a nice hum and they look nasty|
|10-09-2007 02:26 PM|
|Justin||ordered my bushings, and im gonna order my lift this weekend and monday im gonna order some tires. but the tires are what i am having a tough time on. i dont know if i should go with an A/T or a M/T? and suggestions?|
|10-05-2007 11:16 AM|
|daddyjeep||Good thinking....How much do you think I'd get for the wife|
|10-04-2007 04:13 PM|
|10-04-2007 02:04 PM|
|whiteyj||oh no....someone's has been bitten hard with the affliction. Now you're selling off your possessions to pay for your addiction.|
|10-04-2007 11:49 AM|
got my wheels in today! sweet! i might be selling my quad this weekend so ill either buy some tires or the lift.
keep u guys posted
|10-02-2007 04:47 PM|
|10-02-2007 04:33 PM|
are u talking about these:
|10-02-2007 03:12 PM|
|10-02-2007 10:59 AM|
|HkdOnJP||i got mine from jc whitney made by prothane they were 36 bucks for one set front/back.|
|10-02-2007 09:55 AM|
ok heres another one....
i bought set of Stoney 1.5" shackles and i need the bushings still....now here is a 2 part question
1. do i really need to go with the greasable hardware...im hoping to get a decent bushing set, and already have the grade 8 bolts with the grade 8 nylon locking nuts to go with them?
2. where/what bushings to you recommend for this?
heres a pic from them; (not my actual ones in my hand)
|10-02-2007 04:50 AM|
|10-01-2007 04:54 PM|
same place, same price i got mine. sweet!
THANKS SPEAR!!! 405 shipped from your source for the RC 4"!!!
|10-01-2007 12:38 PM|
|HkdOnJP||they are 15x8 with 4" backspacing from qtec at 36.99 each|
|09-30-2007 09:38 PM|
|Justin||looks awesome i like em...where'd u get them and how much>?|
|09-30-2007 08:47 PM|
|09-30-2007 08:44 PM|
|HkdOnJP||those are the wheels i have they look goooood|
|09-30-2007 07:15 PM|
i dont plan on doing much of any off roading or what not....maybe hit a trail ever so often...just going for the looks and to make it drive daily.
and these are the wheels i just bought
|09-30-2007 05:44 PM|
|spearhunter_1||Another thing I feel compelled to tell you is that most people feel that with 4" of lift or more, you should install a slip yoke eliminator, ("SYE"), on your transfer case and use a CV style driveshaft. There is TONS of information on this if you search... I, however, do not have one, (for now - my future plans include lifting it even higher, axles, bigger tires, etc.), and don't have any problems. I have only a very slight vibration at certain speeds and probably will go thru u-joints a little faster. BUT, understand that my Jeep is not a rock crawler or a mud king. Some would call it a "mall crawler" if you will. My suspension will probably rarely, (if ever), see full extension as the most hardcore off roading I do is riding the trails at the management area during hunting season. If you are planning to build a hardcore machine, this issue must be addressed. The slip yoke on your stock DS is designed to slide forward and aft during suspension extension. If you max out your driveline angle, and then wheel it hard, it will apply serious downward forces to your transfer case output shaft and may result in damage to your transfer case and/or your rear differential. At the very least, use your transfer case drop kit that is included.|
|09-30-2007 05:16 PM|
Stock YJ wheels are positively offset at either 5" or 5.5" BS...I don't remember which...anyway, you just wanna get the inside sidewall of the tire a little further away from the front leaf springs. On an 8" wheel width, 4" BS would be neutrally offset. Therefore, an 8" wheel with a 3.75" BS is .25" negatively offset. With my 10" wide wheels, at full lock with 33's, the edge of the tread is a good 2" away from the spring. It stands to reason then, that with 4" BS, the edge of the tread would only be .25" closer and would still be fine.
Another way to keep your rubber off your springs is with spacers. Some people say these are dangerous...some say they wear out your wheel bearings faster...some swear by 'em. Personally, I don't like 'em, but that's just me. Besides it will cost you 200.00 for four spacers...about the same as a set of wheels!
To get a price on that lift from DC, email or call him and ask for a quote including shipping to your zip code. Something you should know about going thru a "middleman" to get your lift is yes, I saved 100.00. But it took three weeks to get it, whereas, if you go right thru RC, it is shipped same day if it is ordered before 2 p.m.
|09-30-2007 03:16 PM|
|09-30-2007 03:07 PM|
yea the plan is to run a 33x12.5x15. i found some Crager Soft 8 for 36.99 for 15x8 5 x 4.5 with a 4" backspacing. so i wanted to know if that would work. i dont really understand what backspacing would be best and what not
thanks for everything, your helping out with much needed info!!!
|09-30-2007 02:43 PM|
Or you can go through Rough Country themselves, (http://www.roughcountry.com/jeep_yj_...lift_kits.html), but it will cost you 429.00 + 89.00 shipping.
I've also seen them for sale on Ebay.
Pro Comp Rock Crawler steel wheels, (http://www.4wheelparts.com/PLT100021T11T209.aspx), are about the most inexpensive, quality wheel you will find new. They run about 50 bucks a piece for 15x8's and about 70 or so for 15x10's...
Other options for wheels might be used on Craig's list, (http://craigslist.org/), or maybe Ebay, just make sure they are 5 on 4.5 bolt pattern.
And, yes, 4" backspaced wheels will work. I'm only assuming you are wanting to run 33x12.50's. A little more negatively offset wheel will prevent you from having to play with your steering stops to keep them from rubbing on your springs. There's no law that says you have to buy offset wheels.
|09-30-2007 11:59 AM|
|Justin||would 4" backspacing work?|
|09-29-2007 11:29 PM|
|Justin||how long have you had each lifts for??? i paid cheap money and took me awhile to find a deal and dont want to spend more on wheels and a lift than i did on the jeep itself|
|09-29-2007 08:39 PM|
One thing I wanted to add, (it won't let me edit my last post for some reason), is that a good source for info on lift kits is 4 wheel drive shops. Or more specifically, installers. They can tell you what lifts are the easiest or most difficult to install. Percentage of each brand that has come back for warranty or replacement. Customer feedback on each brand. Etc, etc...
I'm not claiming that Rough Country is the best brand. I've heard negative remarks on their kits. But their kit fit my needs and budget and I have had zero problems with it. I have never owned or installed an Ol Man Emu lift. I have heard good things about it. But I can not give you facts. Sometimes opinions can be helpful...most times they are biased...but they are what they are...opinions. Good luck.
|09-29-2007 06:54 PM|
This is the way it sits right now...
I don't know if that was a direct flame on me or not! If not, I apologize. It sure seems coincidental, however, that it immediately followed my last post and seemingly trashes everything I have done to it, (my Jeep that is).
|09-29-2007 11:59 AM|
|Odd is he||
Get a better lift than a RC lift, and dont do a body lift...., You'll hate the ride with RC, and the look with the 2" BL, do a 1" at most
Look at Old man Emu, skyjacker, fabtech, and fulltraction......
I clear 33's with some rubing with a 3.5" Old man emu lift, and It rides better than stock!
Thats the way it sat a couple of month ago, dont have pic of with the H.I.D.'s yet, or the smitty built XRC8 winch...
|09-29-2007 11:14 AM|
|09-29-2007 02:04 AM|
|Justin||how hard was the install?|
|This thread has more than 30 replies. Click here to review the whole thread.|