|10-03-2011 04:42 PM|
|Redsand||^x2 on the unimog, or at least its portal axles|
|10-03-2011 04:34 PM|
|10-03-2011 10:29 AM|
|BDK||Even with proper gearing the I6 would have a helluva time turning those! New axles and a V8 or diesel swap!|
|10-03-2011 10:18 AM|
|Pilgrim_Jeep||Why don't you use the axles from a tractor?|
|08-26-2011 09:13 AM|
|Pilgrim_Jeep||And a crapload of horsepower...|
|08-26-2011 08:48 AM|
|hazaelnolasco||yes, Rockwelles are the most strange axles I had ever seen, I think I cannot find one of those here... He also doesnt use shocks in that jeep, just the springs.|
|08-26-2011 12:48 AM|
|banks316||Nice vid...did you notice he had 2.5 ton Rockwell axles?|
|08-25-2011 11:47 PM|
Just look how cool this looks
Huge 4x4 jeep mudding - YouTube
|08-24-2011 05:44 AM|
|08-23-2011 10:42 AM|
|Xpress||I seriously don't see the point. A properly built rig with the right mud tires (NOT TRACTOR) can do everything you're seeing.|
|08-23-2011 01:33 AM|
If you are running through DEEP mud, dont use the Rockwell idea, they have a lot to be desired in ground clearance.
Im thinking a DANA 60/70 combo, if you can find a wrecked newer Dodge truck, I know they run this combination, otherwise at least a set of DANA 60's, but be ready to change parts often regardless.
Dana 60 front
Are those Portals in the red jeep? Im looking at the hub...
Portal front (with a Ford 9" center i believe)
|08-23-2011 01:27 AM|
|hazaelnolasco||I want my jeep to look somewhat like these two:|
|08-23-2011 01:06 AM|
|hazaelnolasco||The competition consists of timing laps, like rally, between checkpoints, with mud, sand, rocks, and water,no running is required, something like this 4x4 2010 Club Merendon - YouTube, I believe that buying boggers from the usa , with all the shipping and taxes would cost me almost 2500 bucks the four tires... I believe its better to invest this money on modifying the jeep with tractor tires because I would save a LOT of money, I can buy excellent asian second hand tractor tires for 75$ bucks each..." which is amazing" making the total cost of the tires would be 300 bucks... which leave me 2200 for the suspension, engine, and axles (which also can be found here for 100$ because no one buys them ) I believe That I should invest more money in engine and waterproofing before luxury tires like swamper, Just look at one of the principal competitors Club Merendon 4 x 4 primera fecha - modificados... - YouTube|
|08-22-2011 09:50 PM|
I've never seen a vehicle run tires like that without some BIG horsepower. And I mean big enough to scatter the hell out of anything under that YJ. Having been raised in Bama, I'm no stranger to the bogs. Big HP, heavy duty running gear. Several thousand dollars. If you can't afgord swampers, I don't see how its rational.
When it comes to any form of racing ... The first sentence should not ber that you can't affotd tires. Expensive hobby!!!7
|08-22-2011 09:34 PM|
|Ibuildembig||The thing that most people forget is that the ag tires are usually way lighter than swampers. I have buddies who run 43's on their mud trucks and they are super light....thats why I said regular 1 tons will hold up just fine.|
|08-22-2011 04:22 PM|
|1995yj318||Dana 60 front and 14 bolt rear with the lowest gears (numerically higher) gears you can get. Cromoley shafts in both and they might survive a little while. Like every one else if I were to do this I would go with 2.5 ton rockwells. With the gears in them being so low you might have a chance. Not much of one but some.|
|08-22-2011 02:17 PM|
|YJ Jeep Freak||Sorry,double post from internet freeze. And its not that cold out yet!|
|08-22-2011 02:08 PM|
|YJ Jeep Freak||I know you dont have to worry about DOT approved tires for street, but the tractor tires are rated for 10 mph. or less. Does that National 4x4 league competition have timed runs as a factor and do you never want to get anywhere quick on the streets?|
|08-22-2011 12:12 AM|
I had been searching on internet, found that dana 60 4.10 ratio are the most recommended, this is because my jeep is a 90 4L with 4.10 ratio also. The reason of why I want to use tractor tires is because I am planning ti use my yj to compete in the national 4X4 league; Honduras may be a small country, but believe, 4x4 is really thought, and There is also a lot of people that know to mod their jeeps, I have al the mecanical and welding equipment, but I need help , because in Honduras I hadnt see a really convincing tractor wheel mod,....
I found the leak time ago, fixed it a week ago, Also got leather seats, and new doors.... you know work in a jeep never ends....
so, the thing is that I am planning on using tractor wheels but not so biiig ones, I now all the work to be done, but I can do it, just need to know how to..
and here is the link of merendon 4X$ club CLUB MERENDON 4X4 here is an expample of one of the best vehicles I could find here,and the types of wheels I want to use is these others:
|08-22-2011 12:03 AM|
|Fweaky||Why not just buy a tractor and put a Wrangler tub on it? You could be driving the first Jeep JD!|
|08-21-2011 11:51 PM|
to run tractor tires, go have a look at the axles (front and rear) on a tractor, then, after having a very good hard close look at the axles, open the engine cowling and an even better look at the power plant it takes to turn those tires, have a really good hard look at that engine, then turn around and look at your Jeep and ask yourself 2 things -
1. how am I going to make any engine with the power to turn those tires more than 15 mph on flat ground fit in that?
2. can I really afford 2 or 3 MPG just to look cool in my undriveable Jeep that isnt even good for wheeling anymore?
It will be an awesome mall crawler, how are the malls in Honduras?
Now that you decided that you can afford 35 miles per tank of fuel, how are your welding skills? do you have enough metal laying around to fabricate a fully custom suspension and steering system? Do you have the skills to fabricate a fully custom suspension and steering system? Those are the questions you have to ask you, before asking someone else how its done. I'm not trying to be mean, but if you have to ask how to do that, you cant do that.
Maybe first you should figure that transfer case leak and find the other 2 bolts for the one seat you have left.
|08-21-2011 11:36 PM|
|Zombiekiller||besides the awesomness of never getting stuck and the constant open-mouthed looks... whats the fun? you would never get stuck, and nothing would be challenging... dont get me wrong, im not against this by any means, im just curious as to your thoughts on why this is necessary|
|08-21-2011 10:26 PM|
|DoubleTap||I would not stop short of 2.5 ton Rockwells...|
|08-21-2011 10:21 PM|
|banks316||Gearing depends on ur tire size, engine, and trans. If you did go with 3.# or 2.# you couldnt go any bigger then a 27in tire. Stock YJ with I6 is 3.07 and stock 4I is 4.10. If you have an I6 4.10 would be go for 32- 33's, 4.56 would be good for 35-36, if you want a lower gear go with a 4.88. If you got 37-39.5 go with 4.88 or if you want lower go with 5.13. I dont know much about the I4 so i cant help you there. As for the axles in the pic they will require you to get a new T-case cause the front pumpkin is on the passenger side. I belive the Dana 300 case would swap it to the other side. Second those axles are going to be wider. If im correct almost 11 inch wider.|
|08-21-2011 08:51 PM|
|08-21-2011 08:46 PM|
|08-21-2011 07:07 PM|
|hazaelnolasco||If I regear the 4.10 gears, to which ratio would I need to regear? 3.#, or 2.#?|
|08-21-2011 06:53 PM|
|Ibuildembig||if its mud only a 60 front will be fine with big outters|
|08-21-2011 06:52 PM|
|hazaelnolasco||could these Dodge 1 ton truck, 8 lug, heavy duty Dana 44/60 (full floating rear) with 4.10 gears work?|
|08-21-2011 06:50 PM|
|banks316||I agree rockwell is your best bet you will also need to regear to compensate for lack of power.|
|This thread has more than 30 replies. Click here to review the whole thread.|