|10-20-2007 10:19 PM|
|tobycat1||Went muddin today... If you run 33's a re-gear would be nice. My dad got stuck in the mud, if he had a little more power he could have put it in reverse and got out. He couldn't get the tires to spin.|
|10-20-2007 10:01 PM|
|mrbigjeep||unless your running oversize tires, regearing would be a waste IMO...|
|10-20-2007 08:54 PM|
|10-20-2007 05:16 PM|
|10-20-2007 04:11 PM|
|Fairweather8588||Thanks for the input guys (this is the kinda stuff you can't find in books)|
|10-20-2007 12:36 PM|
Fairweather8588, Start with Jacks Post (1BLKJP) I know there are alot of shops out there but Joe will help you out and Give you some options first then call around, It all depends on what you want to do with your TJ. Mine like to mall crawl and light trails as well as DD so my 4cyl 5spd works great 31x10.50-15 2" BB no problems.
|10-20-2007 10:20 AM|
|10-20-2007 09:26 AM|
If you're in AZ you might want to look up Stu Olson. He's got just about every mod done to a TJ on his website (and then some). He may be able to help you with information, and hook you up with people that have the know-how of an engine swap. I don't think He's got an entry on his website of an engine swap, so He may be interested in putting yours on there. Good Luck!
|10-19-2007 10:17 PM|
|tobycat1||Sticks tend to have higher gears than autos.... Could be wrong though. Look at the back of your rear axle and tell us.... I'm curious now.|
|10-19-2007 07:38 PM|
|10-19-2007 05:57 PM|
|10-19-2007 05:08 PM|
1. If you do the re-gear yourself- $300-$500
2. Pay someone to re-gear- $1000 Min
3. Pay someone for engine swap- over $2000 for sure.
|10-19-2007 04:41 PM|
|Fairweather8588||what would the cost be for the regearing as opposed to the engine swap? (and I apologize for the vague question...)|
|10-19-2007 03:27 PM|
If you want recommendations on shops, Absolute Offroad is in PHX and DesertFab is in Apache Junction. I know guys at both and they both do awesome work.
check out the local forum as well... http://www.virtualjeepclub.com/index.php
|10-19-2007 02:08 PM|
Why do it? Just buy a Jeep with the 6 or re-gear if you want more power.
What ratio are you running in your axle?
|10-19-2007 02:07 PM|
|Fairweather8588||Due to my lack of mechanical skills (and both of my mechanic friends have moved to another part of the country) I'd most likely just to someone here in the valley to do the swap. anyone w/ suggestions?|
|10-19-2007 02:03 PM|
|AzTJ||It would take quite a bit. You'd need the 4.0/ECU/Wire harness. If you were doing it in your garage, I'd say at least a full week or couple of weekends.|
|10-19-2007 01:50 PM|
I've had my '99 for almost a year now and although I'm a huge jeep fan, still don't have a lot of knowledge about them, thus I come to the experts here a WF...
How difficult would it be to swap the 2.5L for the 4.0?