|12-30-2012 11:41 PM|
|ktx_jeeper||Jerry I'm fixing to order my third header for my Jeep, the one i just installed 8 months ago has the flex joints and still cracked on me. I did buy it on ebay for a 100 bucks so maybe the material wasn't as good or what. Where do you suggest I buy one?|
|08-28-2011 09:40 AM|
|08-28-2011 08:08 AM|
Headers are not going to affect the sound.
While I'd agree a flex joint may correct the cracking issue, a corrugated section is counter productive to the theory of a header which is less restriction and smooth flow.
|08-27-2011 09:08 PM|
|08-27-2011 08:14 PM|
|Jerry Bransford||What I can't understand is why neither Borla nor Banks have installed the flex joints that would stop theirs from cracking. Even the cheap import headers have them. Jeep upgraded their headers to include the flex joints back in '99 or so to fix their problem with cracked headers. I had three cracked headers replaced on my '97 before Jeep came out with the improved header which fixed the problem.|
|08-27-2011 07:20 PM|
|08-27-2011 11:59 AM|
The only way I'd install a Borla is by going with their two piece design which can make the installation and 02 sensor placement problematic.
Personally I'd stick with a one-piece replacement header that has the improved crack-resistant design that adds replacement flexible steel accordan joints where the cracks form which cures the cracking problem.
The newer crack resistant design Jeep later went to looks like the below header (the flex joints are circled in red) which is available all over eBay for a pretty inexpensive price.
|08-27-2011 09:31 AM|
They honor their warranty without question. A few years ago I bought a Cracked Borla header from a friend of mine for 50.00, I figured I would weld the crack and have a good header for my TJ. I read about the million mile warranty and called Borla. Without question, they sent me a return authorization I sent in the cracked header and they sent me a brand new one! It has been on my 98 TJ for 8 years so far with no problems whatsoever.
|08-27-2011 01:42 AM|
|08-26-2011 11:55 PM|
|Decimus||Thanks for the info. I'm thinking Borla it is. They do offer a one million mile warranty; can't really beat that. They also have a 2 piece, I assume for the 2000+ models, might try to adapt that to my setup.|
|08-26-2011 05:12 PM|
|Black98||ive had the raw steel rugged ridge for almost 4 years now w/o a crack on it. But i agree if you could find a 2 peice header and create some time of adaptation to fit our head pipe it would be much much less likely to crack.|
|08-26-2011 01:33 PM|
look into doing the 2-piece manifold swap with a walker intermediate pipe.
|08-26-2011 12:51 PM|
|08-26-2011 12:40 PM|
|TjTheo||i have borla headers, they sound great and no problems at all.|
|08-26-2011 12:37 PM|
Best performing headers?
My exhaust manifold is cracked in like 3 places so I want to switch to headers hoping they will stand up to the heat of the 4.0's I6 better. I was wondering if anyone had an opinion on which brand was any better than the other. I'm a college student so I'm somewhat budget minded, but I'm not going to waste money on Rugged Ridge or anything and have it crack in less than a year. I've also read that the 2-piece manifolds hold up a bit better, does anyone have any experience with these? how was the install?