Jeep Wrangler Forum - Reply to Topic
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > TJ Jeep Wrangler Forum > TJ Tech Forum > Heater core???

Join Wrangler Forum Today


Thread: Heater core??? Reply to Thread
Title:
  
Message:
Post Icons
You may choose an icon for your message from the following list:
 

Register Now

In order to be able to post messages on the Jeep Wrangler Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
10-30-2007 06:30 AM
Shortpunter Has anyone on here tried CLR (calcium, lime rust) in the heater core. I had a buddy suggest that you can disconnect the hoses from the block and add this then flush and it works great- I don't know that much about it other than I wouldn't want it in the block.
10-29-2007 09:56 AM
mud707 I had to change my heater core b4 and it was a pain. You will need to drain the radiator, and a/c, then disconnect those hoses and your a/c. Next you have to remove the dash and unpug your heater controls. After that you have to remove the box surronding it. Once you get the old one out you have to do evrything in reverse and make sure you put the heeter box back together exacly or your duct work flap won't work. It took me about 4 hours to do the job, and some of the screws and bolts you have to remove are a pian. I hope I never have to do it again.
10-29-2007 08:48 AM
richp Be careful with the lawn hose, that core normally operates at ~18PSI, your house pressure can be like 50PSI so don't blow up the core.
Use the hose in a forward backwards motion, flush the top then move the nozzle to the bottom and reverse it, keep doing that till it stops blowing chunks of crud out.
Also drain the system, refill with water and add a bottle of the Prestone 7 hour flush and then go drive it for the time specified. That stuff does quite a job.
Better do it soon before temps go down to freezing and using water and flush causes problems. If you have never done it would also suggest replacing the thermostat and the pressure cap, get them both from the dealer.
The heater core replacement is at least a 7 hour job, the dash has to come out.
If you go that route and have A/C I would also replace the A/C's evaporator while you have it all apart. Evap failure is common on jeeps.
10-29-2007 07:50 AM
Shortpunter I added the flush bottle and some water and ran it for a few minutes the added the garden hose to the top heater line and turned it on and opened th radiator cap it spewed out a lot of brown rusty water. I didn't change the thermo-Some say that it may be the reason- I have a heater core coming but really don't want to tear that apart unless I have to. I may try another flush out.
10-28-2007 07:51 PM
dbwvu had the same problem. I hear changing the core is a pita, however I flushed the core a few times and now It has plenty of heat. Did you flush the core or the rad?
10-28-2007 01:34 PM
Shortpunter
Heater core???

Hello all
I was having an issue with lukewarm heat and flushed and filled the coolant and still nothing more than lukewarm. The thermostat seems to work as the temp guage will rise and drop when it opens. The hoses to the heater core are hot and very frim on top and just warm on the bottom so I assume that the heater core is clogged. I ordered a new one and need some advice on how to replace it. Some say I need to drain the AC and radiator first can someone with experience please respond thanks

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -5. The time now is 12:28 AM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC