|09-01-2011 11:18 AM|
|banks316||That's my next project 5.9l cumming, rockwells, 44" tires minimum|
|09-01-2011 11:13 AM|
|Ibuildembig||Depending on what you wanna do, I always go straight to 1 tons...but thats a wheel and tire change too.|
|09-01-2011 11:07 AM|
|banks316||Ford 8.8 is the most popular its 5/8 narrower the a wrangler but will work great. They can be found in a lot of Ford vehicles. If you for a 96 or newer you get disc brakes. 87 to 88 XJ limited have a Dana 44 there not as strong but they don't have C clips. With a little fab work you can get the Ford 8.8 disc brakes on the 44. The Dana 30 upfront is a good front end and doesn't need to be replaced unless your going to run 38" or larger tires. If you run 35 or larger I suggest you get rid of the CAD and do solid shafts possibly mollys. I run 36 13.50 swamper iroks with the d30/d44 set up with molly shafts up front 4.88 gears and E-ton electric lockers. I built my jeep for one purpose rocks, and never had any brake downs in the drivetrain department. Ok going for my second Rubicon run in a few weeks.|
|09-01-2011 03:35 AM|
Hi everyone! Can you throw in some suggestions on which axles are compatible with the 93 YJ...right now it's stock motor and trans with a 6" spring over axle lift. Running the stock axles with detroit lockers. I'm looking for stronger/better axles. Thanks!