|09-04-2011 10:03 AM|
Brake lines will be fine with the amount of lift he is talking. Same with electrical. Same with hit stock pitman arm.
Track bars (or brackets/ new holes-which are more of a bandaid but work non the less) are something you may want to look into going to 2 or 33 inches of lift.
There is really little else. If you were to go another inch you would however run into more problems, two inches more and your in the deep water.
Not saying CJ7 is wrong, he is right in every way, but there is alot less to worry about with a smaller lift like you are talking.
|09-04-2011 09:30 AM|
|09-04-2011 09:00 AM|
You still need to consider other issues, like brake lines, e-brake, electrical wiring, dropped pitman arm... It's very difficult to lift a jeep a little at a time, it's more of an "all in" type thing.
The reason everyone is telling you not to do a body lift is because you gain no mechanical advantage (you actually lose some by raising your center of gravity). You also diminish the function of your roll bar, because it would be floating on 3" of body lift instead of the solid frame.
What engine, tranny, & gears are you running? If you throw 33"s on there just because they fit, your jeep could be significantly underpowered.
Just some things to consider. I've been there, wanting my CJ to be done already, but doing it right the first time is the way to go.
|09-04-2011 08:13 AM|
|GoldenSahara00||Well I assumed you had a TJ. With a YJ you can do a shackle lift and an add a leaf in addition to your body lift, with new shocks. same basic game. might be a little cheaper.|
|09-04-2011 12:21 AM|
|09-04-2011 12:11 AM|
|SirGeorgeKillian||Take a few seconds to fill out your "Jeep profile" it is under the "User CP" at the top left. That way people will know what year you got and can get you some better advice! What year Jeep you got?|
|09-03-2011 11:03 PM|
|Sirmudsalot||Coil springs? Or leaf springs, I have leaf. Front and back.|
|09-03-2011 10:32 PM|
|GoldenSahara00||BB is a spacer put above the springs of a wrangler, usually accompanied by new shocks of proper length. It gives you "taller springs" without actually getting taller springs.|
|09-03-2011 09:50 PM|
|Sirmudsalot||What's a bb lift? I just got into jeeps , so it's all new to me|
|09-03-2011 09:46 PM|
|GoldenSahara00||1.25 BL and 2 inch BB will get you going for around 300 bucks.|
|09-03-2011 09:44 PM|
|Sirmudsalot||I hear what everyone is sayin I don't want to do a body lift, just wana get some bigger tires under, I have a set of 33" n can't afford the suspension lift yet,|
|09-03-2011 09:32 PM|
Alot of you are good at spitting back information incorrectly
A 3 inch body lift will leave you with alot of space between the frame and tub, a high COG with no extra spring droop or flex, and alot of extra work to do that lift. Even a 2 inch BL is often too high and causes the same issues. Anything 1.25 or lower is generally accepted as a good sized BL and will give you the best of both worlds. Now that I gave you your (unwanted) BL information, I will answer your question.
|09-03-2011 09:28 PM|
NO body lift
Don't do it it's a trick.Just drive around looking like grampows jeep till you can get a good lift.
|09-03-2011 04:56 PM|
|Cj7otr||Oh please don't put a 3" body lift on your jeep. I'd rather see some poor little stock jeep than see a jacked up jeep with the body floating pointlessly above the frame.|
|09-03-2011 11:06 AM|
|09-03-2011 10:31 AM|
|jeeperzcreeperz95||body lift on jeep= a BIG NO NO|
|09-03-2011 10:29 AM|
|InvertChaos||Please do yourself a favor and don't do a 3" body lift get some coil spacers for like $100 instead.|
|09-03-2011 10:28 AM|
|jeepr||3 inch body lift= fail...|
|09-03-2011 08:57 AM|
M Putin a 3 inch body lift on my wrangler, does any one kno if I just use the bottom stock bushings with the new blocks?