|11-05-2007 12:43 PM|
|jeeperx2||My 2" had a block installed at steering shaft/column , gas tank filler hose and vent hose extensions and transfer case shifter extension mine is an auto so i needed nothing else for shifter , fan shroud drop brackets|
|11-05-2007 12:14 PM|
it will also have drop down brackets either on the radiator or the fan shroud...but the 1" BL will come with the 4 new drop down brackets for the fan shroud
i have also heard something about steering column and shifter extension...of course you may be able to leave the shifter extension in if it has one...the shifter will just be a bit long.
|11-05-2007 12:12 PM|
|tazmann910||Remove the body lift and replace it with a 1" body lift. One of the things to look at when lowering the body is your gas tank filler hose, I am sure they put a longer hose on when they put the 3 inch lift on. Hope that helps a little.|
|11-05-2007 09:40 AM|
3" body Lift Removal Help.
Hey Everyone, I just got this 97 Jeep with a 3" body lift. It already has a 4" suspension lift with 36" Super Swamper TSL Radials. I would love to remove this ugly 3" body lift but I don`t no whats involved or what kit to replace it with. It looks like just the pucks have to be removed but I`m not sure about the engine area.I`m thinking about going with 33" or maybe 35" so I don`t need much of a body lift or a body lift at all. Any Suggestions..Thanks