|09-10-2011 12:20 PM|
|zimi117||It doesn't matter that it happens only on one side?|
|09-10-2011 12:12 PM|
|Jerry Bransford||The taller the suspension height, the more angle difference the coil springs are seated between which can cause a bit of rubbing like is happening with yours. That is caused by the suspension lift causing the axles to rotate very slightly by the control arms pulling lower axle mounts a bit further than they do the upper control arm mounts. I wouldn't worry about it.|
|09-10-2011 12:08 PM|
bb post install ??
My zone 2" bb w/ shocks install went well and hassale free for my 98 4.0l. It was my first time really getting to work on a car and enjoyed using the tools. I am really enjoying the ride quality as well but as the suspension settles, I noticed something.
My passenger front coil is slightly rubbing the coil mount/guard. It seems too close for comfort especially with city driving.
I was thinking could I have shifted the bolt when installing new bump stops?
I tried to flex it so I can move the spring and it didn't work (don't have access to the tools).