|12-21-2013 04:53 PM|
|Sicilian Inca||Has anyone had any issues with rattling after it is installed. I'm assuming the multitude if screws around the edges keep it tight but you never know. I'm getting one soon so just wanted to see if anyone has any issues with it. I've seen some thin rubber pieces that go in between some after market parts and the body to keep it from damaging the body.|
|12-18-2013 08:20 PM|
|Sinister6||Qoute to 80906 for Louver 06 TJ. Thanks !|
|11-12-2013 11:57 AM|
Eric Godsey of Bham-JK club, Helena, AL, sent us some photos of this interesting paint job he did with his Poison Spyder Hood Louver. According to Eric, "I found some heat sensitive paint that changes from black to clear at 86F, so I had to find a cool use for it. I’m going for a zombie build and have named the jeep “Hazard”, so...I primed it flat black to start with. I printed a decal of a biohazard symbol, cut it, applied and painted it white, color matched to my jeep. Peeled the stencil, then painted over it completely with the color changing black paint. This hides the white almost completely! Clear coated and mounted it. Once the engine heats it up past 86F, the black turns clear to show the biohazard symbol! Otherwise you have to look for it to see the outline." Very cool idea Eric! Eric's photos of the process:
Vinyl stencil applied:
Biohazard symbol painted white, stencil removed:
After applying the heat-sensitive paint, you can barely make out the symbol through it:
Mounted on the hood:
Mounted on the Jeep, cold:
|09-25-2013 06:02 PM|
|09-25-2013 03:12 PM|
|Dougzin||I was just curious to how affective the Hood louver really would be. I have a 05 TJ with the 4.0 and live in Fort Irwin, CA. AKA gets really hot. My engine does run warm sometimes, and i know heat rises so is there any tests done to see just how much of a difference there is?|
|09-25-2013 01:53 PM|
I would love to order one of these hood louvers. However, I would really like to have black bolts instead of the silver. Does PSC offer black bolts with the assembly?
If, they do not offer the bolts in black does anyone know the size/shape etc?
Is the black a matte finish, semi-gloss, gloss or flat finish?
It would be nice to get the colour matched up with the original black paint on the Wrangler.
Lastly, I live in an area with 4 seasons. Will I see any additional wear and tear on the engine bay than if I kept the hood stock? Do you find a lot of dirt/debris/water damage....? Has anyone considered on lining the interior of the hood with some kind of mesh backing, which allows breathability and can withstand our environment?
Thanks in advance for your support!
|09-25-2013 01:18 PM|
got mine on too
|08-09-2013 07:34 PM|
|05unlimitededition||Got the hood louver and trail gate. And I love it. Finish on the metal was a little rough. But I guess it's a good thing I'm in the Autobody industry. But over all I'm satisfied.|
|07-08-2013 10:56 AM|
|DTS||Sorry there is no forum discount. Almost all of our customers are members of one or more of the forums we're on, so it would be kind of pointless.|
|07-06-2013 09:07 AM|
|07-06-2013 09:06 AM|
|05unlimitededition||Is there a forum discount on poison spider stuff? Looking to get a trail gate and the hood louvre.|
|06-10-2013 04:28 PM|
Thanks to Courtney Torok for sending in these photos of the JK Hood Louver Install sequence.
|05-07-2013 08:42 AM|
|Mattador1516||Looks pretty sick! And the price is right too!!|
|05-01-2013 11:36 AM|
Mattador, here's a pic of the YJ hood louver on Jeremy Hopper's rig at Jeep Beach last weekend
|04-30-2013 07:41 AM|
|homebrwd||Jeep YJ Exterior Upgrades | YJ Hood Louver | Poison Spyder Customs|
|04-30-2013 07:26 AM|
|Mattador1516||Do you currently make one for a YJ?|
|04-26-2013 06:19 PM|
Poison Spyder Hood Louvers are now available for the 2013+ JK with dual windshield squirters! Click Here.
|04-04-2013 04:34 AM|
|04-03-2013 11:53 PM|
|04-03-2013 07:24 PM|
|04-03-2013 01:19 PM|
|04-01-2013 11:08 AM|
|DTS||Its sort of a semi-gloss black. Not quite satin, not quite gloss.|
|03-29-2013 02:02 PM|
Question on the Powder Coat.... Is a glossy black or a satin/matte black? I am wondering if it will closely match my bumpers that I had coated here locally. Which are satin. And they won't do it for just $30.
Or if I should I just go the bare metal route and toss them more money.
|03-25-2013 10:43 AM|
Got a 12" bar mounted on my Poison Spyder hawse fairlead light mount too!
Stay tuned for UFO sightings in Kentucky.
|03-25-2013 10:31 AM|
|03-25-2013 08:46 AM|
Heh, I never did show off any pics after I got the hood back on.
|03-04-2013 10:37 AM|
|DTS||We will have a 2013-specific one available at some point, but I don't have a specific date for it. We do not normally do single-item installs. But some of our dealers do installs. Try So Cal Supertrucks in San Bernardino or Brothers 4X4 in Pomona.|
|03-02-2013 05:50 PM|
|rtguy||U could prob go straight to psc as they are in banning, ca love my louver btw|
|03-02-2013 04:14 PM|
|Steffen1601||I'd love to have that hood louver. Is it available for a 2013 JK with two nozzles? Also, do you know someone who would install it in the Corona/Riverside, California area?|
|02-12-2013 11:44 AM|
|K9HDLR||Great pictures and I agree that the sunset picture wins...|
|This thread has more than 30 replies. Click here to review the whole thread.|