|09-13-2011 08:40 AM|
sounds right to me, I leave the key in 24/7 where i live. park on the shop patio, got two BIG dogs no problem!
|09-12-2011 10:18 PM|
|09-12-2011 02:10 PM|
Only if you're doing things right.
|09-12-2011 12:08 PM|
|wolfpack72||Mine went into the on position but would not turn it far enough to start. If that little piece of pot metal is broke it could be hanging up inside the column. I would try the lube spray first if it's like my jeep there's sand and dirt you wouldn't think sand and dirt could get in|
|09-12-2011 10:31 AM|
|Tyewilly||I'd start by lubricating the lock cylinder.|
|09-12-2011 07:44 AM|
|09-11-2011 11:21 PM|
|wolfpack72||Could be your Ignition Actuator Hanging up in the ignition switch. I'm having to replace mine it broke a piece off and wouldn't start the motor. might try spraying electronic cleaner in the key tumbler housing in case there's some dirt in it|
|09-11-2011 11:14 PM|
|IDSKoT||Starter relay is getting stuck, probably. Swap out the relays and try again.|
|09-11-2011 11:13 PM|
New Jeep owner, starter problem
When i turn my key over, it starts the engine fine, but it keeps grinding like i am holding the key in the start position, and it won't stop until i turn the key back a little bit... is it sticking or what? Does anyone know how to help?