|11-18-2010 10:15 PM|
|hookuspookus||too tired ! if you need more info write back|
|11-18-2010 10:09 PM|
|hookuspookus||your c/b tech is as smart as a box of hammers your supposed to have the body as a ground ,thats why they are called ground plane antennas . but ...... thats not really a good place to mount it because when you key up the ant. is close to the body and will only really transmitt in back of you ,sooooo what you should do is mount a wilson 1000 on your roof not a magnet mount but a roof mount and use the roll bar as your ground plane . i have 0 swr's and talk to belgium ,austrailia , north pole, falkland islands on my RCI-2950 and my radio shack trc-465 . i live in new jersey and just talked to denver yesterday with no linier amp from my jeep , works great ! 529 new jersey|
|11-08-2007 06:04 PM|
Sure can. Should be like this.
|11-08-2007 04:48 PM|
can someone tell me how this is wrong? (CB ant. mount)
i went to a CB shop today to get a new mic and to have them match my radio since i had never had it done, and they some how got to looking at my antenna mount on the back of my jeep. the guy comes in, in kind of a pissy way goes "the way you have your antenna mounted is all wrong" i asked what was wrong with it, and he gets even pissier about it and said that im using my entire jeep as a ground by doing it the way i am. i then told him its always worked before, and i had it mounted that way to my rubicon for 2 years and never once had a problem. he then just kinda huffs and puffs and threw his hands up and was like "well, im sorry, its just wrong" then after he cooled down from who the hell knows why that pissed him off, he explained to me that i need to put the mount upside down some how and that could work. but he said if i dont do something about it, it will fry my radio.
can any one explain to me how this is wrong and if so, how should i fix it?