|10-09-2011 07:53 AM|
|10-01-2011 09:51 PM|
Not wireless - The lights are these -
Rugged Ridge 15207.70 - Rugged Ridge Hood Mount Off Road Lighting Kit for 07-12 Jeep® Wrangler & Wrangler Unlimited JK - Quadratec
The switch is run through the firewall and mounted on the driver side pillar. The lights are run through the engine compartment in a wiring conduit.
|10-01-2011 09:16 PM|
|10-01-2011 11:44 AM|
|trennmaschine||If you haven't ordered them yet, QTec has a set of 3" lights that put out 100W. The kit includes the wiring, switch, and mounts for mounting next to the hood latches. I have them on and am really happy with them. As has been mentioned, they also pass inspection in VA (just had it inspected) since they don't rise above the hood line and are switchable.|
|10-01-2011 11:16 AM|
Firewall wiring pass through
|08-01-2011 03:38 PM|
It will come with instructions on how to wire it and it does come with a switch. A lot of people run the wires through the door to the dash, but I ran the wires from the engine compartment through the firewall into the dash. Takes a lot of patience and time but looks clean and worth the extra time. For the switch I drilled a hole on the right side of the steering wheel and mounted to switch there.
|08-01-2011 03:29 PM|
|SharkusAurelius||So the wiring set will come with a switch? Im just wondering where and how it will be mounted/operated|
|08-01-2011 02:32 PM|
|RedBones||Those are nice lights but check your state laws about windsheld lights. In WV you will not pass inspection if you have any aftermarket lights above your driving headlights.|
|08-01-2011 01:37 PM|
|jkjeeper06||Those lights come with the kit for wiring so you are all set!|
|08-01-2011 10:46 AM|
About to order these,
Lights, Long Range Clear Black 6" Round 100w KCH-233
Light Mounting Bracket Black Pair KCH-7316
Do I need to order any switches to operate them? If so what do I get? And is that all I will need?