|11-14-2013 11:45 PM|
|Wombat Ranger||Thats a sweet seat setup.|
|11-14-2013 03:57 PM|
Latest project code named: Project over kill rear seat install, or Project turret mount m60. Not sure yet. lol!
Anyway the idea thinking ahead to a "real" roll cage and tieing the front seats into it made me think of this. How would i tie the rear seat for my son to the cage too? Well really it does not have to be tied to the cage as long as it's tied into the fram it would be virtually the same.
I picked up another cavalier seat from the take a part. I just wanted one good seat in the back with neck and head support. The factory rear bench seat totally blows for anyone having to set in it anyway. Also i wanted more storage for gear and junk when on the trails.
This is what ensued.... lol
The red tote fits in good but eventually i will have a tool box mounted there. Not sure if i am gonna make that or buy it yet. Also I am 6'2" and i can fit back there now pretty darn good. I could put in some hours in that seat for sure if i had too...
|10-01-2013 07:00 AM|
The sliders are angle Iron. 5" tall 3 to 3" wide. The bar part is 1 1/4" square tube. U just laid out what I wanted and welded it up.
Glad you like them! Thanks!
|09-23-2013 10:45 PM|
|09-18-2013 09:08 AM|
Lol. Thanks! I need to get into the front axle some. New u joints, ball joints, seals, rebuild front ds, Spartan locker. Etc..
Gonna keep the stock shafts and cad for now. Gonna see how far I can push them.
|09-17-2013 12:37 PM|
Halfway through this thread I updated my craigslist ad for my like new 35's for sale. Added "will trade for MIG welder." Haha.
Very cool build.
|08-25-2013 02:56 PM|
Well, it's been a while. All is well with the jeep. I found a smoking deal on a winch. XRC8 smittybuilt. It was $125 Used. The guy said it would only go one direction and thought it was the realy. Turned out one of the wires was in the wrong spot. So i got it working.
I built a winch plate and added it to the bumer that i had built previously. I also did not like the stock relay box and wanted a way to make power not always be applied to the winch. I built my own box for the realy and a 500cont/1000amp max switch. I also placed it down to the side. I like the low profile of it too. I also recessed the winch fairlead as far back on the front as i could to keep it as much out of harms way as possible. Fianlly i upgraded all of the winch wires to 4ga. It is a bit more stout. Only have a couple of pics right now. I need to oil and spool the line a few more times to get it trained better and need to get stuck to test it properly.
|05-30-2013 05:37 PM|
Replaced master/slave clutch cylinders today. I had a leak for a while but i the clutch was getting really weak and would randomly loose clutch pressure. Changed both with a new sealed units from napa. Took about and hour ish.
Clutch feels great now.
|05-12-2013 08:26 AM|
|95YamJam||Thanks a lot! The d30 is all stock right now. Locker, better shafts, ujoints, truss is fututre plans. I know I can break it but ill push it and see. Good luck!|
|05-11-2013 11:45 PM|
|OregonPlinker||Nice work on the belly up job! I found your build in the tummy tuck thread and your work is inspiring. I like your fenders a lot. I have to make flares on mine cause Oregon sucks like that. Im still in the parts collecting stage... Your D30 is locked up IIRC? Have you up graded shafts on it yet? If so was it cause you busted them or just being proactive? Keep up the good work man!|
|05-11-2013 04:21 PM|
Found some pics of the skid plate off and took some of it on...
Not great pics...
|05-08-2013 05:41 PM|
Steering box support..
Just because. LOL!
|05-08-2013 05:39 PM|
Extra under hood fuse panel for electic fan, offroad lights and cb, plus relays and the temp control.
Fuse panel closed and battery area...
Factory airbox used... raised up using factory mount.
Factory coolant overflow, ecu. plated back in with custom fenders.
Switch panel for fan and lights...
|05-08-2013 05:33 PM|
Some pics! I have tones more to go thru. Just ones on my phone...
Flat skid stuff. Best pics i could get for now with no skid. Skid ones to come later...
|05-08-2013 05:33 PM|
|95YamJam||I got the rims and tires from a local dude for $500. They are not hub centric but i made hub rings to make them hub centric. Other than that they are great and were cheap. I sold my 5 32" bfg's for $900.|
|05-08-2013 12:53 PM|
|05-07-2013 09:57 PM|
|95YamJam||36x12.5X15 tsl super swampers on 15x10 wagon wheels.|
|05-07-2013 09:54 PM|
|Commando Solo||What tires are you running?|
|05-07-2013 09:03 PM|
Couple bs pics cleaning out the garage.
|04-23-2013 04:05 PM|
I have been so busy i have been off the net for a while. I have gotten a lot done. I have about 800 pics to go thru yet.
Flat skid, done
led rear lights and front markers, done
rear fenders cut way out, almost done
8.8 is 100% with ebrake, done
custom shock mount bar, done
new exhaust, 50% done
front fenders 100% buttoned up
Electric fan 60% done, mounted but needs wired
steering box brace, done
rear cage to frame support,s 50% done. Doing those now for when the "real" roll cage goes in.
Relocated rear gas filler due to fender cut outs. 100% done
Lots of little things also here and there. As soon as i go thru the pics i will post them. Sorry it's been so long.
|04-05-2013 12:38 PM|
|AZdevilYJ||Any update on this beast!!?|
|02-04-2013 06:14 AM|
It's riddler. I smoothed off the logo and also machined all the holes with a flat land. Then paint.
|02-03-2013 11:33 PM|
|AZdevilYJ||What diff cover is that? U smooth out a riddler or is that home-brewed? Either way that skull is tits.|
|02-02-2013 07:26 PM|
Plus it's super cheap, $.35 a pound, and easier to work with than round sometimes.
|02-02-2013 08:30 AM|
|bigbuckd||Nice fab skills. love the square tube work. Too many people use round tube. Thats been on my list. again nice job.|
|02-02-2013 06:52 AM|
|jp2611||Pics better here didn't realize see the structure underneath on other site...that looks really strong.....|
|02-02-2013 06:47 AM|
|95YamJam||They are done. No flares. We have no fender laws here. Thanks!|
|02-02-2013 12:03 AM|
|daddyjeep||The fenders turned out great. Are they done or do you still need to add a flare of some kind?|
|01-31-2013 07:52 PM|
I have a lot more pics to go thru and figure out. I'll get them up as soon as i can.
|01-31-2013 07:50 PM|
I am looking for a good donor truck. I want the wiring,ecu, trans... all of it. I'll part, discard or scrap what i don't need. Ideally i'd like a 6.0l but they are just harder to find. The little 327 will do me great!
I have been bad about updating this thread...
I have done some work. Here is the stuff i have for now. Front fender work and new wheel paint scheme, riddler diff cover painted for the 8.8 too IIRC.
|This thread has more than 30 replies. Click here to review the whole thread.|