|10-27-2011 06:54 AM|
|bobbav||I replaced mine the other day (bulb #1156). When I took the lens off, the burnt bulb was completely BLUE! I didn't know what the heck I was looking at! Kind of weird....|
|10-26-2011 09:44 PM|
|Wrangler06||lol my back drivers light went out last week haha was just the bulb though..must be a jeep thing ;]|
|10-26-2011 09:37 PM|
|10-26-2011 03:42 PM|
|10-25-2011 09:13 PM|
If I can avoid breaking anything else before the next big payday - that would be good too.
|10-24-2011 09:49 AM|
So, MY passenger rear back-up light is not working.........
Hopefully it's just the bulb.....!
|10-24-2011 08:09 AM|
|prowler||Good work, Voodoo - Now you're a resident "expert" on taillights for the next person who needs help in this area.|
|10-24-2011 05:39 AM|
|voodoo4||Rewired and all seems better now.|
|10-15-2011 05:42 AM|
My bulbs are all good. The back up light works, but not the brake light (so neither does the turn signal.) My tester shows power available in the connector coming out of the Jeep so I am thinking that only some part of the hookup between the lamp and the connector is bad (as I still get power to the back up lamp.) I'm on a budget here so rather than buy a new connector wiring and lamp housing I was going to cut off the connector completely and then wire and crimp the lamp straight across. Not the best fix, but I don't see why it shouldn't work. Any thoughts?
|10-13-2011 09:23 PM|
|Impala_Nite_Ryder||did you check the connector thats waht mine ended up bein. probably from all the bouncing around i did while i was wheeling that day|
|10-13-2011 08:53 PM|
|OcalaJeeper||How does the bulb look? Did you try another bulb in the socket? Do your turn signals work, brake lamp? Stick your test light probe into the socket and clamp the ground onto the frame. Does it light up? keep working the probe up the wiring until it doesn't. Let us know what happens.|
|10-13-2011 08:44 PM|
|10-09-2011 09:32 AM|
|10-09-2011 08:38 AM|
|prowler||Impala - Congrats on fixing your tail light problem. If this is your first time dealing with that wiring back there, feel lucky your problem was with your driver's side tail light. The passenger side wiring has been known to be jambed up in there and not nearly as accessible.|
|10-09-2011 02:12 AM|
|Impala_Nite_Ryder||UPDATE- i found out it was only a loose connector. go figure something stupid thanks for the suggestions. this is why i love this site|
|10-08-2011 09:56 PM|
|10-08-2011 09:38 PM|
|distortedtj||So did you fix it?|
|10-08-2011 09:28 PM|
|Impala_Nite_Ryder||thanks after all tha bouncing around i prolly jsut shook something loose. i figured it was something stupid|
|10-08-2011 09:07 PM|
|distortedtj||Check the wiring for the light. You can follow it from the taillight itself. Just look under the rear corner of the jeep and you can pop the plastic cover off....you will see the wires there.|
|10-08-2011 07:52 PM|
tail light out
after a fun day of jeeping it was brought to my attention that my reverse light and later my left tail light is out. so i got home took the covers off and the bulb looked great. no blackening and the fillament looked good so i put the bulb out of the bad light into the passenger side and it lit up. why is there no power to my driverside tail light ideas?