|07-22-2012 07:25 PM|
|stans1stjeep||Make sure you fuse any circuit you attach to your battery.|
|07-22-2012 07:20 PM|
I was thinking that but the wanted it to be only able to come on when the ignition is on but need a spot near the battery...........
|07-22-2012 09:59 AM|
With the panel off you'll see a quarter-sized hole with foam in it. Remove the rubber filler cap from the engine bay side, straighten out a coathanger, tape the wires to it, and fish em through to the cab.
|07-22-2012 09:34 AM|
|Dmactampa||I did mine to the battery so it wasn't dependent on having other lights on. I'm not an electrician but I did a lot of research first and no problems after three weeks.|
|07-22-2012 06:00 AM|
|snobnk||I know this is old..but it say to wire the white wire to an ignition source near the battery..is there a switched ignition source near the battery I can put the white wire to or can it go right to the battery..mike|
|10-16-2011 01:46 PM|
|10-16-2011 09:07 AM|
|Rogerg||^ hes refering to the cowl which is the part that goes under the windshield.Loosen up a few screws and you can tuck in the wires behind it.|
|10-16-2011 07:13 AM|
|cu in oz||I'm no wiring genius but its simple. I loosened up the panel in front of the windshield and ran the wiring under it to either side next to the light mounts that simply screw into the windshield provided points. There is a tiny 'lip'/indentation in the panel that allows the wires to easily pass. Its really easy......|
|10-16-2011 06:53 AM|
|Arizona Desert Rat||
Wiring your Windshield Mounted Lights
I like the Lights I saw in another thread that were mounted up next to the windshield, but cant fig. out are the wiring for the lights ran through a hole drilled or through a crack in the hinge area, Can some one explain it or post a pick showing it?