|10-23-2011 08:34 PM|
Sounds like a job for my local mechanic
Actually- I made a call on Sat and they said "why? they are good for 100k"
That's is my point--I want them to be anti seized. and since they are going to be out-- I want them replaced with new. Can not hurt
And ..... I am lazy
|10-23-2011 07:55 PM|
|10-23-2011 07:53 PM|
|10-23-2011 07:52 PM|
They looked fine. I checked the gaps as well and all were extremely close, maybe a tiny bit loose, but very close. All of them looked like they were burning clean. The one closest to the driver side firewall seemed a little oily on the threads, but no sign of oil on the electrode.
They definitely could have stayed in longer, but I would certainly be concerned about getting them out at 100k. The thing is, if you are going to check them, you might as well replace them. It was definitely tough getting the boots off with no leverage to work with and having them angled toward the firewall. I wouldn't want to try getting them off later. They definitely should be coated with dielectric grease.
There is very little leverage to get that one plug out and it was a battle. I had one foot on a small step ladder and one on the front bumper in order to attack it from above.
|10-23-2011 07:45 PM|
|El Gringo||am I the only person who doesn't have all that hard of a time with the rear passenger spark plug? it was somewhat difficult, yes, but impossible? no. I just reached back there and got after it, didn't go through the wheel well or anything.|
|10-23-2011 07:43 PM|
|El Gringo||with enough dynamite, anything is possible|
|10-23-2011 07:36 PM|
|10-23-2011 06:39 PM|
|tomthbomb||Will they come out at 100k miles?|
|10-23-2011 05:07 PM|
The question--how did they look?
Been debating changing mine at 40,000
Everyone tells me "why--there good for 100k"
Always replaced my plugs every. 30k
|10-23-2011 04:52 PM|
Conquered the passenger side spark plug
It's a bugger to get to. I used a swivel socket that has a small extension, then another swivel joint and a longer extension. What makes it tougher is that they angle back. The driver's side in comparsion angles forward.
I decided to save the 3 passenger side wires for another day since it didn't look like much fun routing them behind the engine.