|12-20-2007 09:21 AM|
get a 2" BL 2"mml and a 2"BB and
then you dont ahve driveline issues, you get rid of a inch of weird looking and you haev enough lift for even 35's if you wanna stuff em
as for lifts pesonally i woldnt skimp on shcoks!!
get a good lift even if it is a ew hundred more
OMe is the best too btw
|12-20-2007 09:07 AM|
dropping the tcase with a 3" BL would just make it even harder to get into 4wd. do they make a bracket for a 3" BL AND a tcase drop? that would be one huge bracket.
i sure as heck wouldn't leave a 3" BL. they bring the UGLY.
|12-19-2007 10:15 PM|
|skeez2v||Sounds like it should be a pretty easy install then.. should I waste the time removing the 3"BL to install a 1" BL and 2"BB, or would just add the 2"BB ontop of what I already have? Thanks.|
|12-19-2007 05:47 PM|
|Chad P||I don't know about the BB but the T-case drop takes all of 10 min. 3/4" socket and a jack. oh and a 10mm for the linkage.|
|12-19-2007 03:53 PM|
What type of 2" BB would you jeep vets recommend? And what would a T-case drop intale if I did decide to keep the BL on? I could probably figure it out but if you guys recommend this getting done by a pro then I'll take it to a mech shop. Thanks for the replies OH WISE ONES!!!
|12-19-2007 02:32 PM|
|Keagan26||Get rid of the 3" body lift!!!! Go with a 2" budget boost and an inch of body lift.|
|12-19-2007 01:51 PM|
|mrbigjeep||you can add a 2" BB to your setup now...but hopefully you wouldn't have to run a tcase drop.|
|12-19-2007 07:34 AM|
|foxinthemudd||If I were you I would get the 1" BL and 2" BB kit. its not that big of a deal to do. the BB is just 4 pucks that go on top of your springs. I would think that the 3" BL and 2"BB would make it a little off balance... oh and if you do the BB I would think about getting longer shocks to go with it for better performance.|
|12-19-2007 07:26 AM|
I know this is probably an old subject but I was having hell trying to find any old threads on this particular question. I Have a 02 Wrangler x 4.0 Manual with a 3" body lift(I know--this was on there when I bought it) and 33" A/T Nitto's. My question is what kind of mods am I going to need to do to add a 2" BB to what I already have? Do you guys recommend this lift combo? I was just trying to see what I'm getting myself into before purchasing anything. Thanks in advance.