|12-21-2007 10:12 AM|
|12-21-2007 06:38 AM|
|Darton||Looks great thanx for the pics. What about a winch next?|
|12-20-2007 09:30 PM|
i was trying to decid 31's or 32's w/e i can snipe them in real life pretty easily!
|12-20-2007 09:05 PM|
|12-20-2007 09:03 PM|
hmmm is the first pic stock the second one 2'BB and 32's and the third and fourth 4"a nd 33's???
those are def not all 33" and 4"!
|12-20-2007 08:56 PM|
|12-20-2007 07:56 PM|
personally, i would go with the sye/cv and rear adjustable uppers. that will smoothen out everything and give you more clearance. then i would do a rear axle upgrade (if you have the dana 35) and then some armor.
it doesn't sound like you wheel super hard so i think the axle and armor could wait until after you got the sye/cv and control arms.
|12-20-2007 04:28 PM|
Thanks, if you had to prioritize what would be next after what I have done to my Jeep what would it be?
|12-20-2007 04:03 PM|
|mrbigjeep||sye=slip yoke eliminator. used to get rid of any vibrations you have when you put on a suspension lift. it allows you to get rid of the tcase drop. you have to use a cv style driveshaft with a sye. you will also need rear adjustable upper control arms if you decide to get an sye/cv driveshaft. a tummy tuck gets rid of the huge tcase skidplate with a flat skid plate. the flat plate tucks up and gives increased clearance. you will probably need a 1" BL to do a tummy tuck...or clearance may be very tight.|
|12-20-2007 03:55 PM|
Can you help me out with what "CV/SYE and a tummy tuck" is? Sorry I do not know a whole lot about this stuff just yet but I'm quickly learning. Thanks for your input!
|12-20-2007 03:05 PM|
|12-20-2007 02:33 PM|
in that case id stick with what i said before and if you're doing mud then you'll want mud tires if you dont already ahve some
but yeah engine and tranny skid and fuel tank skid
and a front locker, auto is fine
and then movin forward you oculd get a rear locker, manual preffered
CV/SYE and a tummy tuck!!! thats probably the best mod but also the most expensive
the list does on and on but that's what i would start with
|12-20-2007 12:14 PM|
Currently a little bit of muddin and basically whatever areas i can find that are not paved....LOL i live in dallas, tx so i am limited but would like to start venturing out of dallas to find some areas to play that are a little more rough.
I do have quick disconnects already...i should have mentioned that.
I will post up pics when i get home tonight.
I have a pro comp lift from 4 wheel parts...here's the link to it..
Thanks for all the replies so far....everyone on this site is very helpful and informative...i enjoyed reading about 20 pages last night but there is so much info to wade through.
|12-20-2007 11:50 AM|
what kind of a lift do you have now?
|12-20-2007 11:23 AM|
|Darton||HMMM 33's and 4inch lift?? Post some pics so I can see what mine will look like with the same stup. Already run 33's but getting a 4" lift.|
|12-20-2007 11:05 AM|
i'd do some armor if you like to wheel.
or do some axle upgrades.
|12-20-2007 08:26 AM|
X2 what do you do for wheeling?
in general though a engine and tranny skid
a gas tank skid
|12-19-2007 10:59 PM|
Welcome to the forum!
What type of wheelin' do you do? How do you use your Jeep? More info would help get you a good answer.
|12-19-2007 10:51 PM|
New to the forum here and liking what I have read here so far. I was looking for ideas of what to do to my 01 6 cyl Wrangler Sahara next. I currently have a 4" lift with 33's and a warn front and rear bumper. I'm thinking some lockers next but not sure. Any ideas would be great.