|08-18-2013 05:44 PM|
|motrctyman||There's a good video of repacing it on YouTube. Either search 5016709AD or wwwCARSSUCKcom|
|07-14-2013 11:30 PM|
|TideJeep||Thank you, Hardermods! You saved me money tonight!|
|02-01-2012 11:44 PM|
|11-22-2011 09:39 AM|
|Indycop||So if I understand what Clock Springs are, They are not causing my turn signal switch to stay either up or down after a turn?? Thanks|
|11-21-2011 05:44 PM|
|11-20-2011 09:10 AM|
|11-20-2011 08:48 AM|
|Indycop||Thanks, i wondered if it was the switch or the "clock springs", I'm just not sure what they are? lol|
|11-19-2011 11:32 PM|
By the way, I know people have been able to find this part but I bought it on eBay from this seller: eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices
$35 with free shipping. Part is a perfect fit, installed mine today. I think that is a darn good price! Wanted to share it with all of you Jeepers.
Now if I could just figure out my darn turn signal problems.... the replacement switch didn't solve it.
BTW, since the turn signal switch I pulled out of my car wasn't causing the problem with my blinker chronicled here: http://www.wranglerforum.com/f5/erra...ff-122058.html (can someone please help!??? No one has responded), I am selling my old (but working) turn signal for $15 + shipping. PM me if interested otherwise I will put it in the classifieds.
|11-19-2011 10:03 PM|
My turn signal lever does not return to center after making a turn and my steering wheel returns to center, but my signals do work, I just have to remember to turn them off Do I need to replace the multi-function switch or is it something else?
Thanks for any help and sorry to hi-jack the thread!!!
|11-19-2011 07:38 PM|
|05-18-2011 12:21 AM|
|Hardermods||Well when I did it, there happened to be multiple posts on here for the same concern, ie replacing it. Since I had a dead day in the shop I figured what the heck it won't take too long so yeah I did it lol.|
|05-17-2011 11:57 PM|
So Hardermods... you just did that write up because you were bored at work?!
Haha, I'm just reading through the threads, and have no need for this (Yet, I probably will one day,) too cool, thanks!
|05-17-2011 10:56 PM|
|Hardermods||Happy to help, glad you got it fixed!|
|05-17-2011 09:30 AM|
This thread saved me some major headaches and cash. I followed the pictures exactly as above, and got the job done in 45 minutes (it would have been faster if I had paid attention to remove the flasher from the old and place it in the new).
|09-08-2010 06:36 PM|
|wpark013||HarderMods, thanks for this post, just replaced mine. No problems!|
|03-19-2010 12:27 AM|
|03-14-2010 11:05 AM|
All in all, this isn't anything that hard to do, and there is no worries about setting off the air bag.
When I was trouble shooting why I couldn't get my interior lights to come on with the switch (but did come on when the door opened or turned the key off), I just got my tools and went at it with no instructions. Pretty straight forward job. Just take your time.
|03-14-2010 01:27 AM|
|s3nt3nc3d||Bookmarked this thread! Thanks man!|
|03-14-2010 12:56 AM|
Well today was slow at the shop so I got out the camera and took mine out for something to do!
Torx 20 Screwdriver
Torx 10 Screwdriver
Phillps Head Screwdriver
Remove the steering column opening cover from the instrument panel.
Remove the two screws that secure the lower steering column shroud to the upper shroud
If the vehicle is equipped with the optional tilt steering column, move the tilt steering column to the fully lowered position and leave the tilt release lever in the released (down) position.
Remove both the upper and lower shrouds from the steering column.
Disconnect the cross body wire harness connector for the left multi-function switch from the connector receptacle on the back of the switch.
Disconnect the cross body wire harness connector for the right multi-function switch from the connector receptacle on the back of the switch.
Remove the two screws that secure the multi-function switch assembly to the upper steering column housing Using a Torx - 20 bit
Remove the multi-function switch assembly from the upper steering column housing.
Remove the two small screws that secure the right multi-function switch to the left multi-function switch mounting housing. Using a Torx - 10 bit
Grasp the right multi-function switch control stalk firmly and pull the switch toward the right far enough to disengage the alignment pins on the top (1) and bottom (2) of the right switch housing from the alignment ramps on the left multi-function switch mounting housing.
Remove the right multi-function switch from the left multi-function switch.
Remove the combination flasher from the connector receptacle on the back of the left multi-function switch
Common step missed by most is the last one, Make sure you swap the flasher relay!!
|03-12-2010 12:46 PM|
Just ordered one off of jeep4x4center.com They did not have them on their website but I IM'd them and they were able to help me out. They said they only had one left...sorry
Maybe they have another stashed, you never know. Of course I ended up ordering 250 bucks worth of crap but hey, everyone is a winner!
s3n: This is the best I have found and bookmarked:
|03-12-2010 10:28 AM|
Now somebody find a how-to on installing one with pictures...lol
I need to replace mine...but the FSM sure don't make it sound very easy.
|03-12-2010 10:20 AM|
2005 Jeep TJ OEM Wiper / Turn Signal / Headlight Switch : eBay Motors (item 270545304044 end time Mar-21-10 13:13:42 PDT)
|03-12-2010 09:54 AM|
|02-05-2010 08:29 PM|
I just received one for my 2001 with fog lights from rockauto.com
It took about 1 week and cost ~ $70.
|12-15-2009 05:14 PM|
|Contra||huh...cool thanks for the heads up!|
|12-15-2009 01:23 PM|
|gmcdonald8||Contra, there are two phillips head screws on the underside of the plastic steering column cover. Remove those, and the steering column cover comes apart in 2 halves. You do not need to remove the steering wheel.|
|12-15-2009 01:22 PM|
Thanks everyone for your help. I just ordered the last one from Jeepareus.com
I appreciate the advice and help!!!
|12-15-2009 01:11 PM|
|Contra||not to hijack, but i am having a similar problem where i need to replace the switch (and i would), but i don't know how to take off the wheel without setting off the Air Bag|
|12-15-2009 12:47 PM|
|rambone||Had the problem with my 03 Jeep's turn signal's not working when I bought it. Got the turn signal switch from jeepsareus.com for $145. Like you everybody had it on back order!!! I needed the turn signals to work to get a brake tag. Also after I changed the switch it still didn't work, the fuse was burnt under the hood. Everything's working fine now.|
|12-15-2009 10:26 AM|
|This thread has more than 30 replies. Click here to review the whole thread.|